Sharkoon TG6 RGB Black Mid-Tower Tempered Glass PC Gaming Case

Sharkoon TG6 RGB ATX PC Case For hardware that’s not meant to be hidden, Sharkoon have designed and developed the TG6 RGB. This midi ATX case provides hardware with ample space and an exceptional platform for showcasing. The tempered glass front and side panels offer an almost completely unobstructed view of the inside workings of the case, while only the power supply, HDDs and cabling are kept out of sight. Each of the four pre-installed 120 mm addressable RGB fans are equipped with three rows of encircling LEDs. These provide stepless lighting effects within the entire RGB spectrum and optimally illuminate the installed hardware. Those who prefer water cooling will find ideal room for this and also a practical fan tray behind the front panel. Strong Airflow The TG6 RGB has three pre-installed 120 mm addressable RGB fans behind the front panel and another on the rear panel. Their new modular frame design which has no visible screws sets them apart, with rubberized contact points and aerodynamic fan blades sustaining both a strong and a quiet airflow. If more airflow is needed, an additional three 120 mm fans or two 140 mm fans can be installed to the top of the case. All the air-intake areas are protected with removable dust filters to ensure that the case will always perform at its best. Multi-layered Illumination For multi-layered lighting within the entire RGB spectrum, each pre-installed fan is surrounded by three layers of addressable RGB LEDs. Using the built-in 8-port RGB controller, the fan lighting can be customized together with up to four additional LED components. This can be done through the software of a compatible mainboard which has a header with the pinout 5V-D-coded-G or 5V-D-G. Alternatively, for mainboards without a connection for addressable LEDs, there are 20 preset illumination modes available, which can be simply selected using the dedicated button located on top of the case. Unique and Easy Radiator Installation If water cooling is the preferred method for heat removal, then the TG6 RGB is just the case you need. The front of the case offers considerable room for a radiator – up to 5.2 cm thick – but due to the three pre-installed front fans being secured to the front of the chassis, there’s no need to add fans directly to the radiator. The fan tray can be removed together with the fans, facilitating the installation of a radiator up to 360 mm in length, as normal. As Clear as Glass The hardware is viewable through the tempered glass front and side panels, with the power supply, HDDs and cabling disappearing within the power supply tunnel or behind the mainboard tray. For a more elegant appearance and enhanced protection of the glass, the side panel has been designed without any visible screws or bolts. Instead, it is attached via thumbscrews on the rear panel of the case. Spacious Interior Since demanding hardware requires room, the TG6 RGB is spaciously designed. It supports graphics cards up to 40 cm in length, CPU coolers with a height of up to 16.7 cm and power supplies with a maximum length of 20.5 cm. In addition, up to three 3.5” HDDs or up to four 2.5” SSDs can be installed inside the case. Features • Form Factor: Mid-Tower. • Expansion Slots: 7. • Weight: 8.1kg • Dimensions (WxHxD): 215 x 465 x 452mm. • Drive Bays: 3 x 3.5” or 4 x 2.5”. • I/O: 2 x USB 3.0, 2 x USB 2.0, Headphone Out, Mic In. • Motherboard Compatibility: ATX, mATX, mITX. • Fan Configuration: 3 x 120mm (Front), 1 x 120mm (Rear), 3 x 120mm or 2 x 140mm (Top). • Fans Included: 1 x 120mm (Rear), 3 x 120mm (Front). Case Edition Sharkoon TG6 RGB ATX PC Case Case Form Factor Mid Tower Motherboard Form Factor ATX MicroATX Mini-ITX Back Connect Compatible No I/O, Bays & Expansion Front/Side/Top Panel I/O 1 x Headphone Out 1 x Mic In 2 x USB 2.0 2 x USB 3.0 Drive Bays 3 x 3.5" / 4x 2.5" Internal Standard Expansion Slots 7 Vertical Expansion Slots Fans & Filters Fan Bays 4 x 120mm 3 x 120mm / 2x 140mm Fans Included 4 x 120mm Fan Controller/Hub Built-in Fan Controller Dust Filters Bottom Top Liquid Cooling Support Front Radiator Compatibility 1 x 360mm Top Radiator Compatibility Bottom Radiator Compatibility Rear Radiator Compatibility Side Radiator Compatibility Clearances Max CPU Cooler Height 167 mm Max GPU Card Length 400 mm Cable Routing Space Side Panels Window/s Yes Window Configuration 1 x Main Side Window Construction Tempered Glass LED Lighting Functionality LED Lighting No LED Lighting Emitters Included Addressable LED Fan/s LED Lighting Colour RGB LED Lighting Support & Control Compatible with ASRock PolyChromeSync Compatible with ASUS AURA Sync Compatible with Gigabyte RGB Fusion Compatible with MSI Mystic Light Sync Power Supply Compatibility PSU Included No PSU Wattage (If Included) PSU 80+ Rating (If Included) PSU Support ATX PSU Mounting Location Bottom Mount, Rear Max PSU Length 205 mm Chassis Physi