WINN DRI-TAC 2.0 GOLF GRIP BLACK / RED - STANDARD

After years of research and development, Winn is excited to introduce the next generation Dri-Tac. With improved feel and durability, the new Dri-Tac 2.0 represents the best of what Winn polymer technology has to offer. It begins with using Polymer grip technology. As the pioneer of polymer grips, Winn invented multiple polymer compounds that are slip-resistant in all weather conditions. Ultimately, they outperform traditional golfing handles in the market today. Our polymers are uniquely formulated to achieve a wide spectrum of firmness's, textures, and weights to suit any type of golfer. Winn Grips are built for comfort to produce less hand fatigue leading to extended time on the course. Winn Dri-Tac 2.0 Grip - Features: Style – AVS Grip-Size - Standard Core-Size - 0.600 Firmness - Comfort Shock-Obsorption - High Material - WinnDry Texture - Moderate Profile - Tapered Weight - 51 g +FREE GRIP TAPE INCLUDED WITH EACH GRIP STEP-BY-STEP REGRIPPING INSTRUCTIONS The following supplies are needed: 1.PRO-GRIP DOUBLE SIDED GRIP TAPE 2.STANLEY KNIFE / BLADE 3.NEW GOLF GRIP 4.SOLVENT WHITE SPIRITS 5.RUBBER GLOVES TO PROTECT HANDS 6. TOWEL / CLOTH STEP 1 - Remove the old grip with a Stanley blade Be sure to cut away from yourself at all times. Peel or scrape off the old grip and grip tape. Using a cloth and Mineral Spirits Grip Solvent, clean off the residue. *If removing a grip from a graphite shaft be careful to avoid damage to the shaft STEP 2 - Wrap your PRO-GRIP double sided grip tape in a spiral formation from the top of the shaft to the point where the bottom of the grip will be on the shaft. Remove the tape backing and cover the end of the shaft with extra tape. STEP 3 - Cover the vent hole in the butt end with your finger or golf tee, and pour a generous portion of Solvent such as white spirits inside the new grip. Close the open end of the grip with your hand and shake to cover the entire inside of the grip. STEP 4 - Pour the excess Mineral Spirits Grip Solvent (through the vent hole) over the entire length of the two-sided tape. Apply generously. Use a tray to catch excess Mineral Spirits Grip Solvent for use on other clubs. STEP 5 - Place the grip over the shaft butt and Push the grip entirely onto the club. Be sure to push it all the way down and align the grip as desired. This must be done while the grip tape is still wet. STEP 6 - Allow grips to dry for several hours before playing.