Internal - End Post 1000mm High for Impact Protection Railings

Heavy duty triple-ridge barriers designed to segregate traffic lanes from pedestrians Ideal for preventing damage to work areas machinery equipment and buildings each heavy duty impact protection rail is strong and durable. Perfect for use as a health and safety measure these railings are designed to segregate pedestrians from traffic lanes such as those used by forklift trucks and foot traffic walkways. Finished in a high visibility yellow colour there is little chance of them being ignored. Designed as a modular system the railings are quick and easy to install and can be customised to any length required. Should sections become damaged as a result of vehicle impact or similar they can be easily replaced thanks to the countersunk fixing bolts which secure the rails to the posts. The railings can also be extended and modified even after their initial installation. Thanks to their modular design they are readily customisable to suit a specific location with any damaged sections easily replaced. Manufactured in Germany using structural steel to combine quality with strength these railings will provide many years of service. End centre and corner posts are available in two heights 500mm and 1000mm. Barrier rails are sold in four different sizes 1 000mm 1 200mm 1 500mm and 2 000mm. It should be noted that some assembly is required. Powder coated protection railing for internal use Galvanised and powder-coated protection railing for external use Quality strong modular design that is easy to install TUV-tested according to DGUV 108-007 Finished in a high visibility yellow colour Uprights 100mm x 100mm steel box section Horizontal rails 120mm x 80mm steel section Counter sunk bolts secure rails to posts Easy to extend & modify at any stage Base plate measures 200mm x 200mm x 10mm (with 4 drilled holes) Perfect for heavy duty protection Optional manual or self-closing gate available for internal use only Gate can be opened up to 90° either inwards or outwards Shock absorbing pads allow the uprights to deflects up to 10 degrees each way - installed with the anchor set Anchor set fixes x 2 shock absorber pads