Theben theRonda S360-101 UP presence sensor white

For flush-mounted ceiling installation: passive infrared presence detector theRonda S360-101 UP TheRonda S360-100 passive infrared presence detector is ideal for automatic lighting control depending on presence and brightness. It is installed in the ceiling by means of a recessed box (Ø 55 mm, NIS, PMI) and has numerous useful functions. With a detection angle of 360° and a radius of up to 9 metres, an area of approx. 64 m² is covered. If necessary, the detection area can be reduced using clips included in the delivery. The predefined values and settings can only be changed using a suitable remote control. These are available via the accessories - theSenda S user remote control, theSenda P service remote control, theSenda B app remote control. A connection option for pushbuttons or switches for manual switching with automatic recognition "pushbutton/switch" is available. - Mounting height: 2 to 4 m - Power consumption: ~ 0.1 W - Brightness setting range: 30 to 3,000 lux, permanently on - Light run-on time: pulse (0.5 s), 10 s - 60 min - equipped with pulse function for staircase light timer - Channel A light: relay, 230 V - fully automatic operation - Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs - Brightness switching value adjustable, teach-in function - Short-term presence adjustable - Presence switch-on delay: 0 s to 10 min - Presence follow-up time: 10 s to 120 min - Test operation possible to check function and detection range - Incandescent/halogen lamp load: 2,300 W - Fluorescent, compact/fluorescent lamps: 1,150 VA (cos φ = 0.5) - Inrush current: max. 800 A/200µs - LED lamp 2 W: 600 W - Connection by means of screw terminals - max. cable cross-section: 2 x 2.5 mm² - Ambient temperature: -'15 °C to + 50 °C - Protection class: IP54 (when installed)