Paulmann On/Off/Dimmable outdoor wall switch, ZigBee

Can also be used without a gateway: On/Off/Dimmable Outdoor surface-mounted wall switch, ZigBee, IP44 This surface-mounted wall switch from Paulmann can be used to switch and dimm ZigBee-compatible lights. Two groups can be controlled individually thanks to a double pair of switches and each group can contain up to 15 devices. No separate gateway is required for use with the standard settings, but connecting the switch to the smik gateway from Paulmann, which is available separately as an accessory, opens up further possibilities for intelligent lighting control. The free smik app can then be used to assign predefined scenes to group buttons. As this switch is protected against splash water and equipped with a hinged plastic cover, it can be used outdoors. It is screwed on and can therefore be mounted almost anywhere. A power source is not required as this ZigBee wall switch is powered by a CR2450 battery, which is included in the scope of delivery. Technical features / compatibility - Direct control of ZigBee lights possible without a gateway or app - For switching and dimming two groups of up to 15 ZigBee lights each - Based on the ZigBee 3.0 radio protocol - compatible with the smik gateway from Paulmann for an extended range of functions (see accessories) - protected against splash water (IP44) - incl. battery (1 x CR2450, 3V, 620 mAh) - radio frequency: 2.4 GHz - 2.4835 GHz - radio range: 10 m