Mapei Elastocolor Pittura

Elastomeric, Crack-Bridging Protective Paint for Interior and Exterior Surfaces. Mapei Elastocolor Pittura is a single-component, water-based acrylic resin paint designed to provide long-lasting protection and decoration for concrete and cementitious surfaces. Its elastomeric properties allow it to bridge hairline cracks, offering a flexible, waterproof, and breathable coating that resists aggressive atmospheric agents.. Key Features & Benefits. Crack-Bridging Capability: Effectively bridges hairline cracks, maintaining a continuous protective film.. Waterproof and Breathable: Impermeable to water and aggressive agents (CO₂, SO₂) while remaining permeable to water vapor.. Durable Finish: Resistant to aging, freeze-thaw cycles, and de-icing salts.. Low Dirt Retention: Photochemical film formation reduces dirt accumulation on surfaces.. Wide Colour Range: Available in white and various colours using the ColorMap® automatic colouring system.. Application Versatility: Suitable for both interior and exterior surfaces, including façades and concrete structures.. Product Details. Consistency: Thick liquid.. Density (EN ISO 2811-1): Approximately 1.37 g/cm³.. Dry Solids Content (EN ISO 3251): Approximately 63%.. Dilution Rate: 10–15% with water.. Application Temperature Range: +5°C to +35°C.. Waiting Time Between Coats: 12–24 hours, depending on humidity and temperature.. Consumption: 0.2–0.4 kg/m² per coat.. Packaging: 20 kg plastic buckets.. Storage: 24 months in a dry place at temperatures between +5°C and +30°C.. Application Instructions. Surface Preparation: Ensure surfaces are clean, dry, and free from contaminants. Repair any damaged areas with suitable Mapei mortars.. Priming: Apply a suitable primer such as Malech, Quarzolite Base Coat, or Elastocolor Primer, depending on substrate conditions.. Mixing: Dilute Elastocolor Pittura with 10–15% water and mix thoroughly until homogeneous.. Application: Apply by brush, roller, or spray in at least two coats, ensuring the previous coat is completely dry before applying the next.. Cleaning: Clean tools and equipment with water before the product dries.. Limitations. Not suitable for waterproofing horizontal surfaces or areas subject to constant water immersion.. Do not apply on damp substrates or in conditions of high humidity (>85%).. Avoid application in direct sunlight or if rain is expected.. Health & Safety. Refer to the Safety Data Sheet (SDS) for detailed information on handling, storage, and disposal.