Welded Masonry Joist Hanger – Galvanised – 150 x 225mm (6 Pack)

Designed to support 150 x 225mm timber joists from brick or block walls. This welded masonry joist hanger can be built into new masonry or used for renovation work by raking out existing brickwork, providing a secure joist bearing and a dependable connection for floor and roof structures.. Key Features. Designed for supporting timber joists from brick or block walls.. Welded construction for a strong, rigid hanger.. Galvanised (pre-galvanised) steel for corrosion resistance.. Conforms to Eurocode 6 and service class 2.. Manufactured to BS EN 845-1:2013+A1:2016.. Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber.. 90mm bearing for consistent joist support.. 2.4mm thickness with 6 nail holes (3.75mm).. Safe working load: 3.5kN.. Supplied as a single unit (MOQ 6).. Typical Applications. Supporting floor joists built into brickwork and blockwork.. New-build masonry where hangers are built-in during construction.. Refurb and repair work where masonry is raked out to install the hanger.. General timber-to-masonry support where a consistent joist bearing is required.. Specifications. Product code. 150225WMH. Type. Welded. Finish. Galvanised. Joist size (W x H). 150 x 225mm. Width (W). 150mm. Height (H). 215mm. Bearing (B). 90mm. Thickness. 2.4mm. Nail holes (3.75mm). 6. Safe working load. 3.5kN. Approval. BS 5628. CE standard. BS EN 845-1:2013+A1:2016. Eurocode. 6. Service class. 2. Corrosion rating (1–5). 2 – Occasionally damp/wet, rural and sheltered areas. Material. Carbon Steel. Pack type. Unit. Pack quantity. 1 Each. Packs Received. 6. Pack dimensions (L x W x H). 215 x 150 x 90mm. Pack weight. 1.29kg