Fencing Post Extender - Quick Fit - Oxide Red

Post Extender (Quick-Fit, Oxide Red) is a fast, no-dig way to raise the height of an existing timber fence or gate post without replacing it. The heavy-duty steel collar sleeves over the original post, and the quick-fit clamp locks it securely, providing a rigid extension point for new rails, panels or trellis. The durable oxide red coating offers outdoor corrosion resistance and a tidy, professional finish.. Key Features & Benefits. Extend Without Replacement: Increase post height quickly—ideal for adding privacy panels or trellis.. Quick-Fit Clamp: Rapid tightening provides a secure, twist-resistant hold with minimal tools.. Rigid Support: Robust box section helps restore strength to weathered posts.. No-Dig Solution: Avoids disturbing existing foundations, paving or landscaping.. Durable Finish: Oxide red coating for long-lasting corrosion resistance outdoors.. Available Size. To Suit Post Size (mm). To Suit Post Size (inch). 75 × 75. 3 × 3. Product & Technical Details. Type: Post extender (quick-fit clamp). Material: Heavy-gauge steel. Finish: Oxide red coating. Fixing Method: Sleeve over existing post; tighten quick-fit clamp to secure. Applications: Raising fence/gate posts, fitting trellis or additional rails, minor post repairs. Instructions for Use. Check the existing post is sound and plumb; replace severely decayed timber.. Slide the extender over the post until fully seated. Align to fence line.. Tighten the quick-fit clamp evenly for a rigid, twist-resistant hold.. Fix the new extension timber or trellis to the extender as required; re-check tightness after settling.. Limitations & Precautions. Not a substitute for structural design where high wind uplift or lateral loads are present—assess the fence line accordingly.. Ensure the existing post and base are sound; do not use on rotten or loose posts without repair.. Treat any cut end grain on new timber with suitable preservative.. A rapid, clean solution for increasing fence height and adding trellis—quick to clamp, corrosion-protected and ready to support new timber securely on existing posts.