EVERBUILD Lumberjack Triple Action Wood Treatment

Deep-Penetrating Wood Protection Against Rot, Fungi & Insects. EVERBUILD Lumberjack Triple Action Wood Treatment is a high-performance, solvent-free solution formulated to protect timber against all major wood deterioration threats — including wet rot, dry rot, fungi, and wood-boring insects. Its advanced micro-fine active technology enables superior penetration, even into damp timbers, for long-lasting preservation in both interior and exterior environments.. Key Features & Benefits. Triple Protection: Kills and protects against wood rot, fungal decay, and wood-boring insects.. Micro-Fine Penetration: Deeply absorbs into wood for improved long-term protection.. Solvent-Free & Low Odour: Safe to use indoors and in enclosed spaces.. Fast Drying: Touch dry in 1 hour under normal conditions.. Use on Damp Timber: Maintains full effectiveness even when applied to wet wood.. Non-Flammable: Safe for use in high-risk work environments.. Ideal For. Interior and exterior structural timbers. Joinery, roof timbers, beams, and joists. Garden structures: sheds, fences, decking, pergolas. Prevention and treatment of rot, decay, fungi, and insect infestation. Product Details. Packaging: Available in 1L, 2.5L, and 5L containers. Appearance: Pale green or clear liquid (varies by version). Drying Time: Touch dry in approx. 1 hour; allow 24 hours before overcoating. Application Method: Brush, spray, or dip. Coverage: Approx. 4–5 m² per litre depending on wood porosity. Active Ingredients: Permethrin, fungicides, and algaecides. Application Instructions. Surface Preparation: Ensure wood is clean, free from paint, varnish, and debris. Sand where necessary for deeper absorption.. Application: Apply by brush, spray, or dipping. Apply generously to ensure full saturation.. Drying: Allow surface to dry fully before applying any topcoats or finishes. Avoid contact until dry.. Repeat Treatment: For high-risk areas or severe infestations, a second application is recommended.. Limitations. Do not apply to painted or varnished surfaces without prior removal. Not suitable for direct contact with food or drinking water. Avoid use in temperatures below 5°C or during wet weather. Cleaning of Tools. Clean tools with warm soapy water immediately after use. Do not dispose into drains or watercourses.