AEM Electronics High-Output IGBT Inductive Smart Coils

AEM Electronics High-Output IGBT "Smart" Inductive Coils offer the first inductive coil solution that achieves CDI-like spark energy and voltage, combined with an extended spark duration necessary for high-performance vehicles running high compression, high RPM, forced induction and/or nitrous equipped engines.Massive Spark Energy, up to 103 mJIncredibly long spark duration, up to 2.9mSUp to 40kV Output Voltage, without using a CDICost less than aftermarket LS1 coilsFlexible mounting optionsWeather and Shockproof designMost Auto enthusiasts/tuners who have forced induction engines, high RPM engines or run nitrous oxide are well aware of the compromises associated with using inductive coils compared to converting to a Capacitive Discharge Ignition system (CDI). While inductive coils easily achieve a long spark duration, they lack sufficient energy to efficiently ignite the mixture in the combustion chamber of a highly modified performance vehicle. CDIs on the other hand, deliver intense spark energy, but with practically no spark duration, which makes proper air/fuel mixture critical for optimal combustion and performance.With the development of AEM's High-Output IGBT"Smart" Inductive Coils, this is no longer a challenge, as both increased spark energy and duration have been achieved without the need to convert to a CDI system.AEM's High-Output Inductive Coils each deliver over 100mJ of spark energy and a minimum of 40,000 Volts, as much as most CDI systems, without the need for a CDI module! They also provide a very long spark duration at full energy, even out-performing existing CDI/multi-spark systems, which simulate longer spark durations with smaller spark events on either side of the CDI main spark.AEM's High-Output, Insulated Gate Bipolar Transistor (IGBT) "Smart" Inductive Coils are designed for use on applications that do not have an external igniter.TECHNICAL SPECIFICATIONS:Output (no load): 40kV minimumOutput (50pF load): 40kV +/- 10%Output Energy: 103 mJ +/- 7%Peak Secondary Current: 102 mA +/- 10%Arc Duration: 2.9mS +/- 10%Turns Ratio 71:1Maximum Current: 19 AmpsMaximum Battery Voltage: 17 VoltsBase Dwell: 3.0 mSMax Continuous Dwell: 9 mS but don't exceed 40% duty cycleMax Intermittent Dwell: 80% duty cycle, 5 seconds maximumMating Connector: Packard/Delphi 12162825 "Pull to Seat"Mating Contacts: Packard/Delphi 12124075 ";Pull to Seat"High Tension Wire Terminal: HEI "spark plug top" Style