Mapei Mapenet 150 (Fibreglass Mesh) - Alkali-Resistant Fibreglass Reinforcement Mesh

Alkali-Resistant Fibreglass Reinforcement Mesh for Use with Waterproofing and Levelling Systems. Mapei Mapenet 150 is a pre-primed, alkali-resistant fibreglass mesh designed to reinforce cementitious waterproofing membranes and smoothing compounds. Used with products such as Mapelastic Smart, Mapelastic Foundation, and levelling mortars, it improves crack resistance, enhances durability, and stabilises substrates subject to movement or thermal expansion. Ideal for reinforcing waterproof coatings on façades, balconies, terraces, and render systems.. Key Features & Benefits. Alkali-Resistant: Treated to resist degradation in high-pH cementitious environments.. Reinforcement for Membranes: Prevents micro-cracking and enhances tensile strength of flexible coatings.. Lightweight & Easy to Handle: Cuts easily and embeds into wet mortar or membrane layers.. Wide Application Range: Suitable for waterproofing systems, façade coatings, levelling compounds, and render reinforcement.. Conforms to Substrate Irregularities: Ideal for use on both flat and slightly contoured surfaces.. Product Details. Type: Alkali-resistant fibreglass mesh. Weight: 150 g/m². Roll Size: 1m x 50m (50m²). Mesh Size: Approx. 4 x 4 mm. Colour: White with Mapei logo trace. Compatibility: Use with Mapelastic, Planitop, and similar cementitious mortars. SKU: MAPENET150. Application Instructions. Apply Base Coat: Spread the first layer of waterproofing membrane or levelling compound onto the prepared substrate.. Embed Mesh: While the layer is still wet, press Mapenet 150 into the surface using a trowel or float.. Overlap Joints: Overlap adjoining strips by at least 5–10 cm to ensure full coverage and strength.. Apply Second Coat: Once the first coat is cured (or as per system instructions), apply a second layer to fully encapsulate the mesh.. Limitations. Not a standalone product – must be used in conjunction with Mapei waterproofing or levelling systems.. Store in dry conditions and protect from prolonged UV exposure before installation.. Health & Safety. Generally non-hazardous in normal use. Wear gloves and protective eyewear when handling and cutting to avoid skin irritation or airborne fibres. Refer to the Safety Data Sheet (SDS) if needed.