Bartoline Plaster Skim & Repair 2.5L

Bartoline Plaster Skim & Repair 2.5L Ready Mixed Plaster Skim & Repair is suitable for repairs on plaster and plasterboard prior to decorating. It has excellent wet adhesion making it easy to apply, will not slump on vertical surfaces and can be easily smoothed. It will cover holes up to 3mm deep but for larger cavities Ready to Use All Purpose Filler should be used followed by Plaster Skim & Repair. Directions: Surfaces should be sound, dry, clean and free from damp, dust and grease. Surfaces painted with gloss should be sanded to provide a key. Nail heads in plasterboard should be knocked below the surface level and covered with an oil-based paint to prevent rusting. Apply the plaster skim to the surface using a large brush, trowel or other suitable spreader. After the initial setting the surface can be smoothed over using a wet trowel. Alternatively, the surface can be allowed to dry thoroughly and smoothed down using fine sandpaper. When the surface is dry, it can be painted or wallpapered over. Surfaces should be sealed with a plaster sealer or sealer/PVA mix before wallpapering.