Tri-Art : Liquid Glass : Pouring Medium : 500ml

Tri Art Liquid Glass Pouring Medium has been created to accept colour beautifully, keeping them as bright as possible while drying to an extremely hard, clear high gloss finish. It is great for use in high-quality pour paintings, as it lets the acrylic flow, levels perfectly and maintains an even suspension.Liquid Glass can also be used as a top coat. It has complete UV stability and will not yellow over time. Artists should ensure that the paint underneath has fully cured before applying a layer of Liquid Glass. By pouring liquid glass before the acrylics underneath have fully cured, it can cause bubbling within the Liquid Glass as the layers underneath try to cure and release volatiles. We recommend waiting 72 hours for it to cure.Can be used as a clear finishing coatUse on rigid level surfacesDries to an extremely hard, clear and very glossy finishCompatible with Tri Art Liquid Glass colours a range of bright pouring colours with an exact ratio of pigmentEasy flow and strong colour clarityWill not crazeUse with liquid format or high-flow acrylicCan be opacified if white is added to itCan be used to create negative space with coloured pours or to extend pouring mixesRecommended ratio 1:20 colour (liquid acrylic) to try Art Liquid Glass Pouring mediumTest fluid flow and suspension before usePlease note: This medium must be thoroughly shaken and mixed before use. If any lumps are noticeable after mixing, it is recommended to strain these out using cheesecloth.Find out more about pour painting techniques on our blog.