Triton RMA-15-A61-CAX-N1 rack cabinet 15U Freestanding rack Grey

A universal cabinet for data and telecommunication purposes. Sufficient capacity for common applications. a large selection of sizes and options together with a wide selection of accessories and excellent development make it the best-selling cabinet in our range.Rigid constructionRMA has a robust welded construction. High quality workmanship and the newest technologies ensure a perfect look of the cabinet. The skeleton rails have a new shape. are wider and made of 1.3 mm thick material.Flexible door openingThe hinge system allows the door to open almost 180°. The door can be easily removed and re-mounted to change the direction of opening. The double wing doors are equipped with hook-on hinges.Tritón handlesWe manufacture our own handles for the free-standing cabinets. By replacing the plastic module (not included). a half-cylindrical lock insert can be fitted. Patent: PUV 2013-27443Adjustable vertical railsVertical 19” rails can be adjusted freely in any depth of the cabinet. This simplifies mounting of the device and configuration of cables.Removable side panels and rear coverRMA has a welded frame and removable side panels. These are fixed as standard to the frame using a lock with the same key as the door and rear cover.Door for fan unitsWith this cabinet type. it is possible to order a special metal door ready for mounting RAx-CH-X0x-X3 fan units. Further information is available in the section Active cooling.Break-out blanking panelsEntry openings for cables are covered with breakout-type blanking panels. To prevent dust penetration. cables can be sealed in the opening with a brush strip. or simply secure by a protective fringe edge (both supplied with the cabinet).Opening for a fan unitA large opening covered with a breakout-type blanking panel enables mounting and removal of the Triton fan unit from the outside of the cabinet without the need of using screws.Castors. levelling feet. baseThe cabinet can be placed on levelling feet (included) or. with optional equipment. on a base. castors or heavy-duty castors with reinforcing frame.Rear side of the cabinetThere are two cable entries on the rear wall of the cabinet covered with breakout panels. One is at the top and the other at the bottom edge of the cover. The other cable entries are on the ceiling and in the base of the cabinet.Perforation of the skeletonThe RMA cabinets have a perforated skeleton to provide cooling air access to the installed technology. Cooling can be supported by the installation of fan units.BondingAll detachable parts are bonded together according to the requirements of the relevant standard.Flex frame(valid for 800mm wide cabinets) This system allows the installation of vertical rails in 19“. 21“ and 23“ spans according to the specific needs of equipment in use.Middle pair of vertical railsFor enclosures deeper than 800 mm. a third pair of vertical rails for mounting the technology is supplied as standard. Thanks to their open profile. they do not restrict the installation of deeper equipment. Shorter devices can be mounted on the central vertical rail using different types of brackets (optional accessories).Horizontal cable managementFor cabinets with loads of higher than 500 kg. we recommend installing the horizontal cable management system in skeleton. which also acts as a reinforcement.Swing frameAll 800mm wide RMA cabinets can be equipped with a swing frame with a load capacity of 150kg. Maximum available depth of the 19“ equipment is 330 mm.