Edmolift with 2 x 40° tilt function, with 2 x 40° tilt function, lifting range 70 - 970 mm, max. load 750 kg

Pallet lifter, with 2 x 40° tilt function, lifting range 70 - 970 mm, max. load 750 kg. Supplied = pre-assembled, final assembly by customer. Max. load = 750 kg. Lifting range = 70 - 970 mm. Platform design = closed. Lifting time = 13 sec. Power = 0.75 kW. Operating voltage = 400 V. Control voltage = 24 V. Lift drive = electro-hydraulic. Platform colour = signal orange RAL 2010. Platform material = steel. Finish = sheet metal. Frame colour = ultramarine blue RAL 5002. Internal width = 850 mm. Lift = 900 mm. Lifting capacity at full load in multiple-shift operations = max. 10 cycles per hour. Lifting time without load = 13 sec. Lifting time with full load = 13 sec. Platform width = 850 mm. Platform length = 1245 mm. Protection class = IP54. Feature = stationary, electro-hydraulic. Customs tariff number = 84289090. Country of origin = SWE. Gross weight = 285 kg. Weight = 265 kg. The pallet lifters made by EdmoLift allow items to be lifted to a working height of up to 970 mm with no effort at all. The pallet lift provides legroom and space for the user's feet on three sides, with this excellent degree of accessibility ensuring work proceeds smoothly. Pallets, mesh pallets or containers can be placed directly on the pallet lifter using a pallet truck or forklift truck. Product features - Customer-specific adaptations possible, we will provide forks tailored to your specific requirements on request - Good accessibility from three sides - Compliant with EN 1570-1 - features the CE mark - 24 V DC control unit and operating devices with dead man switch - Electrical system compliant with IP54 - Overload protection - Adjustable, high sensitivity protective bars on the outside of the forks - Pallet lifters feature electrical safety valves. TSL/TSE do not feature mechanical service locks - Maintenance free bearings These pallet lifters are equipped with a variable tilting function and can be tilted to the left or right by 40°. This makes the work much easier, as it opens an ''ergonomic window'' that helps the operator to avoid stretching, while ensuring a good overview of the contents of the load unit.