AIM Infrared Belt Temperature System - 400mm

The AIM Motorsport Infrared Belt Temperature System includes an infrared temperature sensor that provides accurate belt temperature readings to the gauge display. The single point temperature sensor shows the average temperature of the controlled area and sends the values every tenth of a second to the gauge via the CAN communication line. This information is displayed on the gauge with colours indicating different temperatures.Temperature data is recorded once every 10 seconds, its saves the maximum temperature measured in that period of time. This data can be reviewed in the gauges data recall sectionIn the menu page you can select your preferred unit of measure from Fahrenheit and CelsiusColour thresholds are displayed as green for low and high thresholds and above in redIt's possible to set two temperature thresholds. One for a warning, when the temperature rises above the alarm level it will display in yellow and a warning message will be seen at the top of the display. When the temperature rises above the alarm level it will display in red, a message will be seen at the top of the display and a red LED will start blinking. The gauge will also read and display the external supply voltage. The voltage will generally be shown in green but like the temperature, you can set warning and alarm thresholds.