Hawk Waterless Coolants Powersports Bike Cool 180° Engine Coolant - 2 Litre

Hawk Waterless Coolants is the new name for Evans. They are the same tried and trusted waterless coolant products sold under the Evans brand for decades, only the name has changed.Optimised for performance bike engines primarily fabricated from aluminium plus some steel and copper components.MX and Enduro bikes suffered for a long time with overheating problems. Riders like to keep the throttle open full most of the time, even when the bike is vitually stationery, ploughing around muddy corners etc. Ram air is in short supply and even with electric fans the water-based coolant often boils. As a tell-tale device riders often fit a hose extension from the radiator cap, which spurts over their visor when boil-over occurs. When this happens they are forced to throttle-back and often lose places. With Power Cool 180°C installed riders are able to stay on the gas and this is the reason why most factory teams use Hawk Waterless Coolants.Please Note: If switching to Hawk Waterless Coolant for the first time you must also purchase Hawk Prep Fluid to remove any dirt, scale and residual coolant. Available in 2 litres or 5 litres (Please call if you require 25Litres).About Hawk Waterless CoolantSince the 1930's engine coolants have been based on a mixture of water, ethylene glycol (antifreeze) and corrosion inhibitors. These mixtures have inherent physical and chemical limitations, they affect engine performance and in some circumstances lead to engine failures.According to the British Testing Council - Testing Advisory Group... " up to 60% of engine failures can be attributed to cooling system failures"... confirming there are inherent flaws associated to water-based coolants and emphasising the need for something better!HAWK WATERLESS COOLANT - Waterless coolant represents a major step forward in engine cooling technology which, over the last 20 years, have proven to increase engine reliability, reduce maintenance costs and improve performance.NO WATER - NO OVERHEATING: Hawk Waterless Coolants have boiling points above 180°C, effectively eliminating overheating, boil-over and after-boil.NO WATER - NO PRESSURE: Hawk Waterless Coolants have a very low vapour pressure, eradicating the danger of scalding and reducing the strain on engine components.NO WATER - NO CORROSION: Water contains oxygen and acts as an electrolyte which leads to corrosion. Hawk Waterless Coolants eliminate these corrosion sources.NO WATER - MORE BHP: Hawk waterless Coolants eliminate engine hotspots which lead to poor combustion and loss of power.NO WATER - NO LINER EROSION: Hawk Waterless Coolants are proven to reduce liner pitting by 75% compared with water based coolants.NO WATER - NO SCALING: Water contains impurities and hardness salts that lead to scaling and poor heat transfer. Hawk Waterless Coolants contain none of these impurities. NON TOXIC: Hawk Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.Technical Data Sheet