AIM ACC3 Analogue CAN Converter For Karts - 1 x 719 Analogue / 3 x Thermocouple Harness, Wiring Harness Option 1

The AIM ACC3 Analogue CAN Converter allows you to expand the data acquisition capability of your kart s logger by adding extra analogue and speed channels. It supports four independent analogue channels at up to 200 Hz each and two digital speed inputs, enabling you to integrate temperature, position, and voltage sensors into your MyChron 6 setup for detailed performance analysis.By converting multiple analogue signals into CAN data, the ACC3 gives you access to a wider range of sensor information using standard wiring and configuration tools in the free Race Studio 3 software.Discover the key features of this converter and how they support more advanced data logging and analysis:4-Channel 200 Hz Analogue Input: Each channel supports up to 200 Hz sampling, allowing you to capture rapid signal changes from sensors such as thermocouples and linear potentiometers for more detailed analysis of dynamic conditions like temperature swings or chassis movement.Dual Speed Inputs with Internal Pull-Up: Two additional digital inputs support open-drain or open-collector speed sensors with internal pull-up, giving you flexibility to track rotational or wheel speed data alongside analogue values for lap timing or performance logging.MyChron 6 Compatibility: Seamlessly integrates into your MyChron 6 system via CAN, allowing direct expansion of your existing data logging setup without needing additional main modules, making the most of the existing infrastructure in your kart.Thermocouple Sensor Support: Compatible with Type K thermocouples using dedicated compensated cables, giving you accurate temperature readings in critical areas like exhaust gas flow or cylinder head, which helps you fine-tune engine performance.0 5 V and 0 12 V Analogue Sensor Support: Accommodates a wide range of common analogue sensors such as throttle position sensors, brake pressure transducers, and more, offering versatility to monitor various engine and chassis parameters on the same module.Thermo Resistor Compatibility: Accepts temperature input from NTC or PTC sensors, enabling coolant or ambient temperature logging with precision, improving your understanding of thermal conditions across the kart.CAN Expansion for Lambda, Video, and Tyre Monitoring: Adds a CAN bus connection point for modules like the LCU-One S Lambda Controller, SmartyCam 3, or Tyre Temperature Kit, enabling you to centralise data from multiple sources into a single analysis platform.Race Studio 3 Integration: Fully supported by Race Studio 3 software for setup, configuration, and analysis, including access to advanced tools like suspension analysis with Eclipse sensors and synchronised video with SmartyCam 3, giving you the ability to match data traces with real-world footage.Compact, Robust Design: The small form factor makes installation in tight spaces straightforward, and the rugged housing is built to withstand vibration, heat, and moisture common in kart racing, ensuring long-term reliability in harsh conditions.Custom Channel Configuration: Once sensors are connected using the appropriate harness, you can configure and label each channel through Race Studio 3, allowing you to tailor your setup precisely to your kart's data logging requirements.The ACC3 helps you turn additional sensor data into actionable insight by integrating temperature, speed, and position readings into your existing MyChron 6 logging system. Whether you're tracking engine temps, pedal travel, or speed signals, this converter becomes a key part of your kart s data setup. It s a practical addition if you re expanding your telemetry system and need a compact, reliable way to manage extra channels.Wiring Harness OptionsOption 1 - Basic harness with external power connectionOption 2 - Harness with external power connection plus 4 x CAN multipliers. Ideal for adding LCU1S lambda controller and SmartyCam