Mecalux Pallet Racking Galvanised Wire Mesh Deck with 3x Supports, for 1150w x 900d mm Levels

These versatile wire mesh decks combine low weight with high strength, making them an excellent alternative to timber or steel. They are ideal for storing irregular-sized loads on pallet racking. Please keep in mind that the pallet racking frames, beams, and chipboard decks are not included. The prices listed below are only for galvanised wire mesh decks. Made from electro galvanised steel meshes measuring 50mm x 100mm with a wire diameter of 4mm. Suitable for damp areas and sprinkler systems On Mecalux Pallet Racking Beams, they are simple to install and use. Designed to hold irregularly sized loads and unpalletized stock. With our open wire mesh panels, you can increase the versatility of your pallet racking. Simply choose the kit that matches the width and depth of your Mecalux pallet racking bays. Wire decks are ideal for storing irregularly sized loads, as well as smaller boxes and cartons. The adaptable alternative to wood and steel pallet racking decking. Particularly recommended in areas where fire regulations prohibit the use of timber decks. Wire mesh is a lightweight material with a high strength-to-weight ratio. Made of high-quality, electro-galvanized steel. The electro-galvanised finish protects against corrosion. Suitable for storing irregularly sized loads or boxed goods for easy hand-picking. Exceptionally well-suited to wet environments. For environments with sprinkler systems, open wire mesh decking is also recommended. Installation is quick and easy; simply place over pallet racking beams. Simple to clean and maintain. The open wire design promotes free air flow and prevents dust accumulation. When working beneath tunnel bays, wire mesh decks protect the worker's head from falling objects. Please keep in mind: When using mesh decks, the capacity per level is the same as the pallet beam capacity because the pallet level loads are supported by the front and rear pallet beams. If pallets or unpalletised loads that do not span the pallet beams are to be stored, please contact us for load capacity calculations. Loads must be distributed uniformly across the mesh decks and supported by a minimum of three mesh deck cross bars. Half pallets should not be stored on mesh decks