Kramer Electronics PT-572+ AV extender AV receiver Black

The PT−572+ is a DGKat™ twisted pair receiver for HDMI signals. The PT−571 converts an HDMI signal to a single twisted pair signal and the PT−572+ converts the twisted pair signal back to an HDMI signal.- Max. Data Rate - 1.65Gbps.- HDTV Compatible.- HDCP Compliant.- DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.- HDMI Support - HDMI (V.1.4 with 3D. Deep Color. x.v.Color™. HDMI Uncompressed Audio Channels. Dolby TrueHD. DTS-HD).- 3D Pass-Through.- System Range - Up to 90m (295ft) at 1080i. or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i. or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable.- Cable - Requires Shielded Twisted Pair (STP) cable. For optimum range and performance use. use Kramer's BC-DGKat524. BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution. graphics card and display used. The distance using non-Kramer CAT 5. CAT 6. and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.- EDID PassThru - Passes EDID signals between the source and display.- Status LED - Lights red when receiving power only. orange when output and power are attached. and yellow when both an active input and output are attached.- Power Connect™ System - A single connection to the transmitter or the receiver powers the system when the devices are within 270ft (90m) of each other.- Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter.