Brodit 547769 holder Passive holder Tablet/UMPC Black

Active holder for fixed installation. With tilt swivel. With spring stud locking.The holder with locking is to be used when you want to have your tablet extra firmly in place. The holder has a spring stud locking device. it keeps your device in a firm grip in the holder.For fixed installation. provides a discreet installation without any cables hanging. 12/24 Volt. E-approved. Connect power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones). not for large devices (tablets). If you want to place a tablet onto the car’s dashboard. each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place. as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest. installed onto the Brodit headrest mount.Charging specifications:Input voltage: DC/10-30VCharging voltage: DC/4.75-5.3VOutput current(Typ): 2.0AInput & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protectionLED charging indicator: Power input indicator(Green). Ovp/Ocp/Output short(Red)Operating temperature: 0°C ~ +40°CStorage temperature: -20°C ~ +80°CRoHS compliant: ROHS