PLANET GT-1205A network media converter 1000 Mbit/s Black

Standard. Complies with IEEE 802.3 10BASE-T. Complies with IEEE 802.3u 100BASE-TX/100BASE-FX. Complies with IEEE 802.3ab 1000BASE-T. Complies with IEEE 802.3z 1000BASE-SX/LX. IEEE 802.3x full-duplex flow-control, back-pressure in half-duplex eliminate packets loss. Interface. Dual 100BASE-FX/1000BASE-SX/LX SFP fiber-optic slots. One 10/100/1000BASE-T Copper, auto MDI/MDIX function. Auto-negotiation for 10/100/1000BASE-T; half-duplex or full-duplex for 10Mbps and 100Mbps, full-duplex for 1000Mbps. Supports maximum frame size up to 10K jumbo packet size. IEEE 802.1Q Tag VLAN transparent, multicast pass through. Redundancy. Link status auto-detecting and redundant on dual ports with the same connector type. Allows only the Primary-Port or the Backup-Port to activate at a time. When the Primary-Port link fails occurs, the traffic swaps to Backup-Port automatically. Once the Primary-Port link regains, the traffic swaps from the Backup-Port to the Primary-Port. Hardware fiber port redundant. Mechanical. External 5V/2.5A DC power supply. LED indicators for easy network diagnose. DIP switch for 100FX or 1000X SFP module supports on dual SFP slots. DIP switch for 3-port operation in Gigabit switch mode or redundant mode. Compact in size, easy installation. Co-works with PLANET 10”/19” Media Converter Chassis (MC-700/MC-1500/MC-1500R/MC-1500R48). Wall mounting and DIN-Rail installation supported. PLANET GT-1205A Gigabit SFP Media Converter is upgraded by providing dual SFP slots; accept 100FX or 1000X SFP module, and other features shown below:. - DIP Switch for 100FX or 1000X SFP module supports on dual SFP slots. - DIP Switch for 3-port Operation in Gigabit Switch Mode or Redundant Mode. - Redundant Hardware Fiber Port. Highly Convenient and Distance Extendable. The GT-1205A is equipped with one 10/100/1000BASE-T port and dual SFP slots to support conversion between 10/100/1000BASE-T and 100/1000BASE-X network. The dual SFP slots make the Ethernet signals connect easily and efficiently by adding single-mode or multi-mode media modules or the combination of both types. The GT-1205A provides high reliability and flexibility to extend the media transmission distance up to 550m or 2km (multi-mode fiber) and 10km or longer 20/40/80/120 kilometers (single-mode fiber or WDM fiber), depending on the optional 100/1000BASE-SX/LX SFP modules.. Adjustable DIP Switch for 100FX or 1000X SFP Module Selection. Via the built-in DIP switch on rear panel, the GT-1205A can be configured as supports 100BASE-FX SFP module or 1000BASE-X SFP module on its dual SFP slots, the GT-1205A can be connected over fiber optic cabling at a distance extended from 550 meters to 2km (multi-mode fiber) to 10/20/40/80/120 kilometers (single-mode fiber or WDM fiber), using the PLANET MFB/MGB series 100/1000BASE-X SFP modules.. Adjustable 3-Port Switch Mode or 2 Fiber Port Redundant Mode. Via the built-in DIP switch, the GT-1205A can be configured as 3-port Ethernet switch or 2-port redundant media converter. In the 3-port switch mode, the GT-1205A can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 2-port redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode also supports auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair.. Easy Deployment Standalone or with Chassis. The GT-1205A Gigabit Media Converter can be used as a standalone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700 and MC-1500 chassis series. These media chassis can assist in providing DC power to the GT-1205A Gigabit Media Converter and the fiber-optic network can be maintained at one central location. With the 3-port switch mode, they work in high performance Store and Forward mechanism, and prevent packet loss with IEEE 802.3x Flow Control (Full-duplex) and Back Pressure (Half-duplex) function.. Plug & Play Installation. As the GT-1205A Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/FX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy simply by using the plug and play feature.. Network. Duplex system. Full, Half. Auto MDI/MDI-X. Yes. Ethernet LAN data rates. 10,100,1000 Mbit/s. Ethernet interface type. Gigabit Ethernet. Networking standards. IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z. Converter output interface. 1000Base-X. Converter input interface. 1000Base-T. Maximum data transfer rate. 1000 Mbit/s. Performance. Maximum transfer distance. 120000 m. Features. LED indicators. Yes. Product colour. Black. DIN rail mounting. Yes. Plug and Play. Yes. Internal. No. Ports & interfaces. Fiber optic connector. SFP. Fiber ports quantity. 2. Ethernet LAN (RJ-45) ports. 1. Connectivity technology. Wired. Power. Input current. 2 A. Input volta