PLANET WGS-804HPT network switch Managed Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black

Physical Port. 8-Port 10/100/1000BASE-T Gigabit RJ45 copper with 4-ort IEEE 802.3at/af PoE Injector (Port-1 to Port-4). Power over Ethernet. Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE. Backward compatible with IEEE 802.3af Power over Ethernet. Up to 4 ports of IEEE 802.3af/802.3at devices powered. Supports PoE power up to 36 watts for each PoE port. Auto detects powered device (PD). Circuit protection prevents power interference between ports. Remote power feeding up to 100 meters in standard mode and 250m in extend mode. PoE management. Total PoE power budget control. Per port PoE function enable/disable. PoE port power feeding priority. Per PoE port power limitation. PD classification detection. PD alive check. PoE schedule. Industrial Case/Installation. Compact size, wall-mounted, magnetic wall mount and DIN-rail design. IP30 metal case protection. Supports -40 to 75 degrees C operating temperature. Supports ESD 8KV DC Ethernet protection. Redundant power design. 48V~56V DC wide power input. Switching. Hardware based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation and auto MDI/MDI-X. Features Store-and-Forward mode with wire-speed filtering and forwarding rates. IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation. 8K MAC address table size. 10K jumbo frame. Automatic address learning and address aging. Supports CSMA/CD protocol. Layer 2 Features. Supports VLAN. IEEE 802.1Q tagged VLAN. Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support. Protocol VLAN- Voice VLAN. Private VLAN (Protected port). Management VLAN. GVRP. Supports Spanning Tree Protocol. STP (Spanning Tree Protocol). RSTP (Rapid Spanning Tree Protocol). MSTP (Multiple Spanning Tree Protocol). STP BPDU Guard, BPDU Filtering and BPDU Forwarding. Supports Link Aggregation. IEEE 802.3ad Link Aggregation Control Protocol (LACP). Cisco ether-channel (static trunk). Maximum 4 trunk groups, up to 4 ports per trunk group. Provides port mirror (many-to-1). Loop protection to avoid broadcast loops. Easily-deployed and Expanded Network. Designed to be installed in a wall enclosure or simply mounted on a wall at any convenient location, PLANET WGS-804HPT, an innovative, Industrial 8-port 10/100/1000T Wall-mounted Managed Switch with 4-Port PoE+, offers IPv6/IPv4 dual stack management, intelligent Layer 2 management functions, and user-friendly interface. The WGS-804HPT is able to operate reliably, stably and quietly in any environment without affecting its performance. With a total power budget of up to 144 watts for different kinds of PoE applications and featuring ultra networking speed and operating temperature ranging from -40 to 75 degrees C in a compact but rugged IP30 metal housing, the WGS-804HPT is an ideal solution to meeting the demand for the following network applications:. - Building/Home automation network. - Internet of things (IoT). - IP surveillance. - Wireless LAN. Built-in Unique PoE Functions for Powered Devices Management. As it is the managed PoE switch for surveillance, wireless and VoIP networks, the WGS-804HPT features the following special PoE management functions:. - PD alive check. - Scheduled power recycling. - PoE schedule. - PoE usage monitoring. Intelligent Powered Device Alive Check. The WGS-804HPT can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the WGS-804HPT will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.. Scheduled Power Recycling. The WGS-804HPT allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.. PoE Schedule for Energy Saving. Under the trend of energy saving worldwide and contributing to environmental protection, the WGS-804HPT can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.. PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE Usage. Via the power usage chart in the web management interface, the WGS-804HPT enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities. Moreover, the WGS-804HPT helps users to monitor the current status of PoE power usage easily and efficiently via its advanced LED indication. Called “PoE Power Usage”, t