StoneCare4U Essential Brick Acid Cleaner 5L 2 Pack

Transform your brickwork with StoneCare4U Essential Brick Acid Cleaner. This high-performance formula tackles a range of stubborn stains on acid-resistant surfaces, both indoors and out. Effortlessly dissolve and remove mortar, cement, efflorescence, ingrained dirt, and light limescale deposits, as well as light calcium deposits. Suitable for a variety of materials including ceramic tiles, porcelain, brick, clay and quarry tiles, terracotta, concrete, and many natural stones.For best results, pre-clean the surface to remove loose debris and always wear appropriate safety gear: gloves, eye protection, a face mask, and protective clothing. Apply neat or diluted (up to a 1:5 ratio with water), testing a small, inconspicuous area first to determine the ideal dilution and dwell time. Wet the surface before application, the dilution will depend on the severity of the staining. Reapplication may be necessary for persistent marks, potentially using a stronger solution and working on smaller sections. If using indoors, ensure good ventilation during and after use and that no vapours remain in the room.Crucially, this cleaner is unsuitable for acid-sensitive materials like enamel, zinc, chrome, stainless steel, polished marble, limestone, and lacquers. Avoid contact with fabrics and promptly clean up any spills, rinsing thoroughly with cold water. Keep away from carpets and upholstery.Coverage ranges from 10 to 40 square metres per litre, varying depending on the stain type and its tenacity. This pack contains two 5-litre bottles.