Moravia semi-automatic lowering, semi-automatic lowering, hot dip galvanised

Barrier post, semi-automatic lowering, hot dip galvanised. Supplied = assembled. Height = 2050 mm. Height above ground = 900 mm. Post dimensions = 76 mm. Material = steel. Finish = hot dip galvanised. Post colour = hot dip galvanised. Design = can be lowered. Type of mounting = for setting in concrete. Mounting = with ground sleeve. Place of use = indoor and outdoor use. Design of head = flat head. Depth below ground = 1150 mm. Tube form = round. Lock type = triangular utility lock. Weight = 22 kg. Product type = bollards/barrier posts made of steel. Customs tariff number = 73089098. Country of origin = DEU. Gross weight = 22.8 kg. Weight = 22 kg. For the temporary release of traffic areas. Hot-dip galvanised quality steel. Easy installation. With ground sleeve for setting in concrete. Upper part can be easily replaced. This barrier post is an elegant solution for when access roads, paths or restricted areas need to be temporarily opened up, without creating a tripping hazard once the barrier is removed. Ideal for pedestrian zones, market squares, car parks, garage driveways, archways etc. The post can be retracted in seconds using a surface hydrant key in accordance with DIN 3223: Traffic can then roll unhindered over the ground sleeve, which is concreted in almost flush with the surface. Overall height 2050 mm, of which 1150 mm is below ground. Diameter: upper section: 76 mm, lower section: 100 x 100 mm. Easy to install. The upper section can be replaced if damaged. Semi-automatic: After being unlocked with the triangle key, the gas pressure spring automatically raises the upper section from the ground sleeve. After being raised slightly, the post locks automatically. The unlocked upper section is lowered simply by pushing it down. Installation note: ensure proper drainage (fill with gravel). The PARATlift may not be installed in standing water (e.g. ground water). Maintenance: important for flawless function. Remove any dirt that has accumulated, clean all moving parts and grease the locking hook at least every six months.