T7Design 5kw Midi Heater With PWM Fan Controller - Option 2

The T7Design 5kW Midi Heater with PWM Fan Controller provides high-output cabin heating for vehicles where compact installation is required. It combines a 5kW heater matrix, a high-flow axial fan delivering up to 280 CFM, and a programmable PWM controller to give you controlled heat distribution and adjustable airflow.Review the key features of this heater below:5kW Heater Matrix: A high-capacity water-fed heater core designed to integrate with your vehicle s cooling system delivers up to 5kW of heat output, allowing you to draw consistent thermal energy from the engine coolant and maintain effective cabin heating in mid-sized vehicles, agricultural or commercial cabs and marine installations.High-Flow Axial Fan (Up to 280 CFM): The integrated axial fan produces airflow of up to 280 cubic feet per minute, ensuring heated air is circulated efficiently through ducting and into the cabin so you achieve fast, even temperature distribution.Programmable PWM Fan Controller (15 100% Speed Control): The pulse width modulation controller allows precise adjustment of fan speed from 15% to 100%, giving you accurate control over airflow and noise levels so you can tailor heat output to suit changing conditions.PC Configurable Control Software via USB-C: The proprietary PC software enables configuration of fan characteristics when connected by USB-C, allowing you to fine-tune parameters for specific installations and achieve predictable, repeatable performance.Multi-Input Compatibility (Rocker Switch, 10K Potentiometer, Rotary Encoder): The controller accepts various switched inputs including ON/OFF rocker switches, 10K potentiometers and rotary encoders, providing flexibility in how you integrate controls into your dashboard and ensuring the heater works seamlessly with your chosen switchgear.Adjustable Rotary Encoder Resolution and Speed Limits: When using a rotary encoder, you can define minimum and maximum fan speeds and adjust sweep resolution, enabling controlled progression between set speeds and delivering consistent airflow adjustment.Four 51mm (2 ) Side-Mounted Outlets: The heater casing incorporates four 51mm diameter outlets compatible with standard ducting hose, allowing you to route warm air to multiple locations within the cabin and achieve targeted heat distribution.16mm Bore Coolant Connections: The hot water inlet and outlet are designed for 16mm bore pipe, supporting straightforward integration into most coolant circuits and ensuring secure, leak-resistant plumbing.Lightweight Aluminium Casing with Black Anodised Finish: The aluminium housing features a corrosion-resistant black anodised coating, providing structural durability while keeping overall system weight low and maintaining long-term resistance to moisture and wear.Optional Pre-Wired Power Fly-Lead and Fan Switches: Pre-assembled wiring options are available with power fly-leads and switches ready to plug directly into the controller, reducing installation time and simplifying electrical setup.Benefit from controlled, high-output heating that can be directed exactly where it is required through ducted outlets and adjustable fan speeds. The combination of PWM control, configurable inputs and lightweight aluminium construction makes it suitable for structured installations where airflow management and packaging space matter. Adding this heater to your vehicle or cabin setup provides a practical and well-integrated heating solution that supports consistent comfort in demanding environments.Available options:Option 1: Supplied with a 5 pin fan switch connector and pins and a 4 pin power connector and pins but without wiring.Option 2: Supplied with a pre-wired fan switch harness (1m long), a pre wired power flylead (1m long) and 4 position rotary fan switchOption 3: Supplied with a pre-wired fan switch harness (1m long), a pre wired power flylead (1m long) and 5 position rotary fan switch