
FloPlast Solvent Weld Waste Branch - 135 Degree x 32mm White
by FloPlast
£1.12
GTIN05055149902284
EAN5055149902284
MPNWS42
Prices updated 26 Mar 2026
Compare 1 Retailer
£1.12
Best PriceAmazon
Check live price on Amazon.co.uk
eBay
Check availability and price on eBay.co.uk
Deals & Voucher Codes
Product Description
This type of waste branch is used to connect a section of waste pipe into an existing pipe run that is running at a 45 (or 135) degree angle to it.This fitting is available in 32mm and 40mm size options.Our solvent weld waste is manufactured in the UK to BS EN 1455 and is kitemarked.To make a solvent weld joint, first ensure that the outer wall of the pipe and the inner wall of the fitting are both clean and free from grit or swarf. Apply SC250 solvent cement to both surfaces. Push the pipe fully into the fitting and give it a twist to ensure that full contact has been made. Clean off any excess solvent with a damp cloth and leave for 5 minutes to set. The installation should be left for 12 hours before testing.Click here to watch a step by step video of how to make a solvent weld joint.Solvent weld joints are permanent - they cannot be demounted once the joint has been made. When using solvent cement, always work in a well ventilated area and keep the cement away from heat sources or naked flames. Avoid any contact with skin - if contact does occur then wash thoroughly with soap and water.
More products from Professional Building Supplies
Browse their full range on Yorkshire.com
Related Products
Browse all Plumbing
Click Clack Basin Waste 1 1/4In Chrome Easy Clean
£19.95

Monument Drain Testing Plug
£16.02

Nuie White Shower Waste with Square Top | Brushed Brass | 144mm x 86mm x 144mm
£20.95

Old London Roll Top Bath Waste, Leg and Trap Pack | Chrome | Brass | 77mm x 55mm x 85mm
£231.95

Manifold 110Mm 32/40/50Mm Black Soil Sp588B
£39.72

Nuie Basin Waste with Poly Plug and Ball Chain | Chrome | Brass | 61mm x 92mm x 61mm
£8.95
From£1.12Professional Building Supplies
Buy Now