G3P600 Remineralization RO System - Waterdrop G3P600

Model number WD-G3P600-MZ Certification NSF/ANSI 58 & 372 Pure to drain 2:1 Materials System cover: BPA-free plasticFaucet: smart display faucetRO filter: reverse osmosis membraneCB filter: carbon blockCF filter: PP cotton & carbon block Power cord length 90 inches Product dimensions 18.11 x 5.67 x 17.73 inches Item weight 15.44 pounds Included components System cover, Smart screen faucet, RO filter, CF filter, CB filter, PE pipes *3 ( 60" ), T-fitting, drain saddle, lock clips, power adapter (Main power cable 90", faucet's power cable 59") Faucet Smart Screen Faucet Flow rate 0.42 gallon per minute (GPM), 600 gallons per day (GPD) Indoor or outdoor use Indoor use only Wall plug Yes Usage conditions Ice machines, Faucets, Aquariums, RVs An electrical outlet is required to operate the RO system. Reduction substances TDS, chlorine, taste and odor, chloramine, scale, turbidity Carcinogens: chromium (hexavalent), chromium (trivalent), cadmium and cadmium compounds, ferric oxide Heavy metals: lead, mercury, barium, copper, radium 226/228, aluminum Microorganic contaminant: cyst Inorganic pollutants: arsenic and inorganic arsenic compounds, fluoride Organic pollutants: asbestos, benzene, formaldehyde, nitrite bisphenol A, trichloromethane, chlordane, PFOA & PFOS, and more What is the difference between Waterdrop and traditional RO systems? Waterdrop G3P600 RO system Waterdrop G3 RO system Traditional RO system Tankless design ✔ ✔ ✖ Flow rate 600GPD 400GPD 50-100GPD Smart leakage protector ✔ ✔ ✖ 3s filter change time ✔ ✔ ✖ Pure to drain 2 : 1 1 : 1 1 : 3 Real-time Water Quality Display ✔ ✔ ✖ What is the pure to drain ratio? The pure to drain ratio is 2:1, therefore, for every 2 cups of pure water you get, only 1 cup of wastewater is produced, which is much higher than the traditional RO systems. What is new about the Waterdrop G3P600 Ro water filter system? The RO system offers faster water flow (600 gallons per day) and can filter a cup of water in about 8 seconds. Compared to traditional RO systems, the Waterdrop RO System has a low drain ratio of 2:1. Save more money on your water bills! What is reverse osmosis water systems? Reverse osmosis (RO) is a water purification process that uses a partially permeable membrane to filter out impurities from drinking water. In reverse osmosis, an applied pressure is used to overcome osmotic pressure, a colligative property that is driven by chemical potential differences of the solvent, a thermodynamic parameter. The result is that the solute is retained on the pressurized side of the membrane and the pure water is allowed to pass to the other side. To be "selective", this membrane should not allow large molecules or ions through the pores, but should allow filtered clean water to pass freely. How does a reverse osmosis system work? A reverse osmosis system reduces sediment and chlorine from water with a prefilter before it forces water through a semipermeable membrane to reduce dissolved solids. After water exits the RO membrane, it passes through a postfilter to filter the drinking water before it enters a faucet. Does the reverse osmosis water filtration system produce wastewater? All RO systems will produce concentrated water to discharge impurities. Compared to traditional RO water purifiers, Waterdrop RO system produces less concentrated water and saves 300% more water. You can collect concentrated water to mop the floor, wash your car, do laundry, etc. What contaminants can Waterdrop reverse osmosis water filter system remove? Waterdrop reverse osmosis water filter system adopts advanced composite filter technology. Uses the characteristics of various filter materials skillfully and combines them to achieve better filtration. The composite filter can intercept most harmful contaminant. • TDS, chlorine, taste and odor, chloramine, scale, turbidity. • Carcinogens: chromium (hexavalent), chromium (trivalent), cadmium and cadmium compounds, ferric oxide. • Heavy metals: lead, mercury, barium, copper, radium 226/228, aluminum. • Microorganic contaminants: cysts. • Inorganic pollutants: arsenic and inorganic arsenic compounds, fluoride. • Organic pollutants: asbestos, benzene, formaldehyde, trichloromethane, chlordane, PFOA & PFOS, etc. Does Waterdrop reverse osmosis water filter system need power? The RO system has a pump that will need power to maintain a fast water flow rate. How to install reverse osmosis system? Waterdrop RO systems are designed for DIY installation. You can install the system in 30 minutes. Simply refer to the instruction manual and instructional videos, or contact us by email, phone, or live chat. This video explains how to install Waterdrop RO system. How often do I need to change the RO filter? G3: The CF filter has a 6-month lifetime; the CB filter has a 1-year lifetime; the RO filter has a 2-year lifetime. Waterdrop G3 Reverse Osmosis System has a smart faucet and filter life indicators that will remind you to replace the filter. Does the reve