Davies Craig Digital Gauge Thermatic Fan/EWP Switch Kit - Black, Black

The Davies Craig Digital Gauge Thermatic Fan/EWP Switch Kit is a state of the art temperature control system that allows you to make quick adjustments at the push of a button. When extra cooling is required, the gauge will automatically activate single or twin fans or a fan and electric water pump which have been set at your target temperature. The gauge can be mounted to a dash board with its pedestal mount or the gauge can be taken out of the mount and mounted in a dash like a conventional auxiliary gauge.Control both fans from the gauge. Override fan 1 or fan 2 independently and also the A/C. By pressing and holding the Fan and A/C buttons, this will turn off the fans.If the temperature gets to high, an audible alarm will be activated which also has a 5 minute snooze function.The gauge can run the two fans separately and you can set them to independent temperatures. The sensors have an adjustable range of 0°C to 130°C and the gauge has a temperature display of 5°C to 110°C. The sensor probe can be placed in the radiator fins or directly into the coolant system (adaptor kit required, p/n DCP0409).Kit contents: 52mm Digital Thermatic Fan Switch gauge, mounting stand, wiring loom/harness, 15 & 30 amp fuse's, scotchlok, 2 x 12V 40 Amp 5 pin relays, connectors (yellow), 5 6mm eye crimp terminal, self tapping screws, temp probe mounting kit, installation instructions.Suitable for 12V or 24V operation. Please note: for 24V application 2 x 24V relays required (not supplied)