Theben thePassa P360 Slave UP presence sensor white

Remote-controlled slave passive infrared presence detector thePassa P360 Slave UP ThePassa P360 Slave flush-mounted presence detector is designed for installation in a flush-mounted box on the ceiling. It features two detection zones that can be switched on and off separately. With a 360° angle of detection, this results in a rectangular detection zone of up to 150 m² (30 m x 5 m). The detection zone can be extended by master-slave switching. A maximum of 10 detectors can be connected in parallel. The detector is preset at the factory and can therefore be put into operation immediately. If the detection range is to be limited, this can be done using the cover clips supplied. The values and settings can only be changed using a remote control, such as App remote control theSenda B, Service remote control theSenda P and User remote control theSenda S. The matching remote controls can be ordered separately using the accessories. - Mounting height: 2 to 15 m - Connection type: Screw terminals - Own consumption: 0.1 W - max. wire cross-section: 2 x 2.5 mm² - Size of flush box: Ø 55 mm (NIS, PMI) - Ambient temperature: - 15 °C to + 50 °C - Protection class IP54 (when installed)