T7Design 12V 1000w Ducted Electric Cab Heater

The T7Design 12V 1000W Ducted Electric Cab Heater provides fully electric cabin heating for vehicles using a 12V DC supply. It combines a 1000W heating element with a 3-speed centrifugal blower delivering 176 CFM airflow through four 50mm duct outlets, allowing you to route warm air precisely where it is required.Below are the key features of this heater and how they support reliable cabin heating:1000W 12V DC Heating Element: The integrated 1000W electric heating element operates from a 12V DC supply and can be wired to deliver 250W, 500W, 750W or 1000W output, allowing you to tailor heat delivery to suit electrical capacity and cabin size, resulting in controlled temperature management without placing unnecessary load on your electrical system.3 Speed Centrifugal Blower (176 CFM): The centrifugal blower provides up to 176 cubic feet per minute airflow and is designed to maintain pressure through extended duct runs, enabling effective heat distribution through multiple vents and ensuring consistent airflow even when ducting is routed over longer distances.Four 50mm Diameter Duct Outlets: The unit features four 50mm outlets that allow you to connect flexible ducting to different areas of the cabin, giving you the ability to direct heated air towards windscreens, footwells or seating areas and achieve even temperature coverage throughout the space.Variable Blower Speed Control: The 3 speed fan allows you to reduce blower speed when lower airflow is sufficient, helping you manage cabin noise levels and electrical draw while maintaining steady heat output during extended operation.Electrically Insulated Heating Surface: The heating element surface is fully electrically insulated and mounted within a non-conductive, temperature resistant housing, reducing the risk of electrical exposure and ensuring safe integration into enclosed vehicle installations.Self-Limiting Heating Element Design: The self-limiting element draws less current as it approaches its maximum temperature threshold, which regulates heat generation automatically and helps maintain stable operating temperatures without the need for complex external control systems.85°C Bimetallic Thermostat Protection: An integrated 85°C bimetallic strip thermostat monitors internal temperature and interrupts power to the heating elements if the threshold is exceeded, protecting the unit from overheating in restricted airflow conditions.Single-Use Thermal Fuse Safety Cut-Off: A built-in thermal fuse permanently breaks contact if internal temperatures rise beyond safe limits due to total fan failure or airflow blockage, ensuring the heating circuit is shut down and preventing further heat build-up.You achieve dependable cabin heating using a fully electric system that avoids reliance on engine coolant circuits. The combination of adjustable heat output, controlled airflow and layered safety protection gives you predictable temperature control in enclosed vehicle spaces. This heater is a practical addition to your vehicle setup when you require controlled, ducted heat from a compact 12V unit.