T7 Design 5kw Midi Heater - Front Vented

The T7 Design 5kW Midi Heater provides high output cabin heating using a compact hot water system. It uses a 5kW aluminium heater core, twin 16mm (5/8") hose tail connections and a choice of 3-speed blower fans to deliver controlled warm air through four 51mm (2") duct outlets.Below are the key features of this heater:5kW Aluminium Heater Core: A high-efficiency aluminium heat exchanger transfers thermal energy from your engine s hot water circuit into the airflow, delivering up to 5kW of heat output which allows you to warm medium sized cabins effectively and maintain consistent interior temperatures in demanding conditions.Mid-Size Vehicle Heating Capacity: The 5kW heat output provides sufficient thermal performance for mid-sized vehicles, commercial or agricultural cabins, camper vans and marine applications, allowing you to maintain consistent cabin temperatures across varied environments and ensure dependable heating wherever a hot water system is available.12V 3-Speed Blower Fan Options: Available with either a 235 CFM high power fan rated at 64dB or a 175 CFM low noise fan rated at 55dB, the three selectable speeds let you control airflow volume to suit operating conditions and achieve the balance you want between maximum heat delivery and reduced cabin noise.Four 51mm Ducting Outlets: The heater casing incorporates four 51mm (2") diameter air outlets that accept standard duct hose, enabling you to route warm air to screens, footwells or specific cabin areas which ensures targeted heat distribution and improved demisting performance.16mm (5/8") Hose Tail Connections: Twin 16mm hose tails provide a secure connection to your vehicle s hot water circuit, supporting efficient coolant flow through the heater matrix and ensuring stable heat transfer for dependable operation.Optional Remote On/Off Water Valve: An available inline water valve operated by a Bowden cable allows you to control coolant flow to the heater remotely, giving you direct regulation of heat output from the driving position and helping you manage cabin temperature accurately.Aluminium Housing Construction: The lightweight aluminium casing keeps total weight to approximately 2.8kg while maintaining structural rigidity, reducing installation load and supporting long-term durability in demanding environments.Black Anodised Finish: The anodised surface treatment provides corrosion resistance and an OEM-style appearance, helping the heater maintain its finish over time and integrate neatly into your cabin installation.Side or Front Vent Variants: Available in both side vent and front vent configurations, you can select the outlet orientation that best suits your installation layout which simplifies packaging within confined spaces and supports efficient duct routing.Achieve reliable and controllable cabin heating by integrating this 5kW unit into your vehicle s hot water system. The combination of configurable airflow, multiple duct outlets and remote water control allows you to tailor heat delivery to your layout and operating conditions. As a compact and lightweight solution, it makes a practical and considered addition to your vehicle setup where dependable heat distribution is required.Please Note:This heater is not supplied as a complete kit. It is recommended to install with a 4 position fan switch, rotary heater control knob, bowden cable, water hose, air ducting and air vents.The heater is not stand-alone and requires a hot water supply, either from the vehicle engine cooling system or separate hot water heater.The included water valve is not a bypass design so when in the "Off" position there will be no water flow back to the engine. As a result, this heater is unsuitable for use on vehicles where the heater circuit is also used as the engines thermostat bypass circuit. If the vehicle doesn't have a thermostat bypass circuit you can either retrofit a thermostat bypass water circuit or install the heater option without the water valve.