LaCont HxWxD 3080 x 8100 x 1530 mm, HxWxD 3080 x 8100 x 1530 mm, capacity 48 x 200-litre drums

Hazardous goods shelf container for passive storage, HxWxD 3080 x 8100 x 1530 mm, capacity 48 x 200-litre drums. Supplied = assembled. Place of use = outdoor use. Height = 3080 mm. Width = 8100 mm. Depth = 1530 mm. Sump capacity = 2x800 l. Drum capacity = 48x200 l. Material = sheet steel. Finish = painted. Position of hinged door = long side. Door type = sliding door. Internal height = 1250 mm. Internal width = 3900 mm. Internal depth = 1300 mm. Type of floor = hot dip galvanised sump tray with grate, max. load 1000 kg/m² with evenly distributed load. For media = flammable liquids, water hazardous dangerous goods. Max. snow load = 159 kg/m². Number of storage levels = 2 pcs. Colour = sky blue RAL 5015. Hazard class = for water hazardous liquids in GHS categories 1 - 4, for the passive storage of flammable substances in GHS categories 1 - 3. Test symbol = with general certification from the DIBt (German Institute for Construction Technology) Berlin. Product type = hazardous goods containers. Customs tariff number = 94062000. Country of origin = DEU. Gross weight = 3012.5 kg. Weight = 3000 kg. Sustainability = Recyclable. For regulation-compliant outdoor storage of flammable and environmentally hazardous liquids. With general technical approval/design approval DIBt Berlin Z-38.5-122 and Ü mark. Space-saving storage on two storage levels minimises costs per storage space. The water protection specialist container consists of a robust frame construction with hollow and rolled sections and, together with a 5 mm tightly welded and tested sump, ensures high safety for the passive storage of flammable liquids of GHS category 1 - 3 and water-hazardous liquids of GHS category 1 - 4. Removable, hot-dip galvanised gratings guarantee stability and easy cleaning processes, while galvanised liquid diversion sheets provide additional safety in the event of an accident. The container shell painted in RAL 5015 sky blue and lockable sliding gates made of sheet metal ensure high corrosion protection. The snow load is 1.56 kN/m² according to DIN EN 1991-1-3/NA2. Supplied complete as standard are crane eyelets for transport when empty, 100 mm ground clearance for under-ventilation, hot-dip galvanised base plates including earthing connection points, as well as composite anchors for fixing the container. Please enquire about further colours, designs, accessories, special designs and individual project planning. Notes: When storing flammable liquids of GHS category 1 - 3, the required safety distance to surrounding buildings, according to TRGS 510, must be observed. If this cannot be guaranteed, we would be happy to offer you a solution in F90 construction upon request. Depending on the outside temperature and solar radiation, the internal temperature can rise significantly. Based on the safety data sheets, the specified limit values and the possibility of co-storage must be checked by the operator. The use of this water protection specialist container for the intended purpose should be coordinated in advance with the competent authorities. The inspection/acceptance by an expert at the installation site may still be required, in accordance with the applicable national legal regulations. Customer-provided services: - Strip foundations according to the foundation plan provided in advance by the manufacturer (installation on composite paving or asphalt is not permitted) - Unloading, erection, alignment and anchoring - (unloading on site possible upon request) - Earthing connection to existing foundation or deep earth electrodes (stainless steel) - Internal and external lightning protection for hazardous material storage according to local installation conditions and valid regulations.