EVERBUILD® 701 Non Slip Tile Adhesive

Showerproof Acrylic-Based Tile Adhesive with Enhanced Grab and Slip Resistance. EVERBUILD® 701 Non Slip Tile Adhesive is a ready-mixed, acrylic-based adhesive designed for securing ceramic and porcelain wall tiles and mosaics in interior settings. Its superior non-slip properties and high bond strength make it ideal for bathroom and kitchen applications, including domestic showers when used with Everbuild Powdered Wall Tile Grout.. Key Features & Benefits. Ready-Mixed Formula: No mixing required; apply straight from the tub.. Enhanced Slip Resistance: Acrylic-based formulation provides excellent non-slip characteristics, preventing tile movement during installation.. High Bond Strength: Achieves bond strength nearly three times the British Standard minimum requirement.. Extended Open Time: Allows for greater flexibility during tile placement.. Showerproof: Suitable for areas exposed to intermittent water, such as domestic showers.. Compliance: Tested to EN12004 type D1T.. Ideal For. Kitchen and bathroom walls.. Domestic shower areas (when used with Everbuild Powdered Wall Tile Grout).. Ceramic and porcelain wall tiles and mosaics.. Product Details. Packaging: Available in 3.75 kg, 7.5 kg, and 14 kg tubs.. Colour: Off-white.. Density: Approximately 1.7 g/cm³.. Layer Thickness: 3–6 mm.. Open Time: 20–30 minutes at 20°C.. Curing Time: 24–72 hours, depending on substrate and conditions.. Coverage: Approximately 0.6 m²/kg with a 6 mm notched trowel; 0.5 m²/kg for solid bed application.. Shelf Life: 12 months in unopened containers stored between +5°C and +25°C.. Application Instructions. Surface Preparation: Ensure surfaces are clean, dry, and sound. Porous surfaces, including plaster, should be primed with Everbuild® 503 SBR Bond diluted 1:3 with water and allowed to dry.. Application: Apply adhesive to the wall at a depth of 3–6 mm, covering no more than 1 m² at a time.. Dry Areas: Use a suitable notched trowel to comb the adhesive before placing tiles.. Wet Areas: Do not use a notched trowel; instead, bed tiles directly into the adhesive.. Tile Placement: Press tiles firmly with a slight twist to ensure full contact. Periodically check that at least 75% of the tile is covered with adhesive.. Cleaning: Remove excess adhesive while still wet using a damp cloth or sponge, especially along grout lines.. Limitations. For wall applications only; not suitable for floors.. Not suitable for areas subject to rising or penetrating damp.. Not recommended for swimming pools or external use.. Do not apply to damp surfaces.. Cleaning of Tools. Clean tools and equipment with water immediately after use. Cured adhesive must be removed mechanically.