Heavy Duty Floor Paint - Biokil Crown

Durable Solvent-Based Polyurethane Floor Coating for Industrial and Domestic Use. Biokil Crown Heavy Duty Floor Paint is a high-performance, solvent-based polyurethane floor coating designed for use on concrete and wooden floors in garages, factories, workshops, and other interior settings. Its semi-gloss finish provides a durable and long-lasting surface that is resistant to pedestrian foot traffic and light vehicular movement.. Key Features & Benefits. High Durability: Resistant to pedestrian foot traffic and light rubber-wheeled vehicular traffic.. Versatile Application: Suitable for concrete and wooden floors; can also be used on some asphalt floors (test application recommended).. Easy Application: Ready to use; can be applied by brush or roller.. Mid Sheen Finish: Provides an attractive semi-gloss appearance.. Coverage: Approximately 12 m² per litre, depending on surface porosity.. Quick Drying: Touch dry in 3 hours under normal conditions; recoatable after 16–24 hours.. Ideal For. Garage floors. Factory and workshop floors. Interior walkways. Wooden and concrete surfaces. Product Details. Packaging: Available in 5 Litre and 20 Litre tins.. Colours: Dark Grey, Light Grey.. Finish: Mid Sheen.. Thinner: White Spirit.. VOC Content: High (25–50%).. Application Instructions. Surface Preparation: Ensure surfaces are clean, dry, and free from loose or flaking materials. Remove oil, grease, and dirt using a heavy-duty degreasing agent. New concrete floors should be allowed to mature for several months before painting. Dense, smooth concrete surfaces may require acid etching to promote adhesion.. Priming: Porous surfaces may require a primer. Consult technical data for recommendations.. Application: Stir paint thoroughly before use. Apply two coats, allowing overnight drying between coats under normal conditions. The first coat may be thinned with up to 20% white spirit to assist drying.. Drying Time: Touch dry in 3 hours; recoatable after 16–24 hours.. Limitations. Not suitable for use on floors that are likely to be continuously wet.. Not recommended for use on asphalt floors without prior testing.. Ensure adequate ventilation during application and drying.. Cleaning of Tools. Clean tools and equipment with white spirit immediately after use. Do not empty product into drains or watercourses.