Retractapost Galvanised Bollard - 90mm diameter - 500mm Tall

Lockable galvanised steel bollards which retract into the ground to allow access Bollards provide a very effective and safe method to prevent unwanted vehicle access. These Retractapost Bollards are ideal for use in forecourts shopping centres and offices as well as in pedestrian only areas. The Retractapost Bollard has a simple yet reliable construction. With no internal mechanism the mild steel sliding post has a smooth moving action which allows the bollard to lock into place. For added security standard and high security padlocks can be fitted but please note they are not included. The padlock is fixed between the post and cover flap for extra protection. This bollard uses a simple flap design for protection against acts of vandalism. The Retractapost Bollards are supplied with reflective labels allowing greater visibility of the bollard at night. You can choose between two sizes to suit your premises. The first option is a 500mm high bollard (above ground) with a diameter of 76mm and a below ground depth of 790mm the other option is for a bollard with an above ground height of 745mm along with a diameter of 90mm and a below ground depth of 1070mm. We aim to deliver the Retractapost Bollard to you within 3 to 5 working days from when we receive your order. No internal mechanism Mild steel sliding post facilitates smooth moving action All posts have a galvanised finish Padlocks can be fitted and are sold separately The sliding post can be replaced by authorised key holders in the event of damage No jamming below ground as it will only lock in the up position Optional padlocks are protected from vandalism by the integral flap Reflective labels available RetractaPost with integral locks are also available For installation we recommend that a hole 1100mm deep and 300mm in diameter is excavated the top 3-400mm of the excavated hole should be filled with concrete & the socket lid should be no more than 10mm above ground level after installation.