Stormdry Masonry Protection Cream - Breathable Water Repellent for Masonry Surfaces

Deep-Penetrating, Breathable Water Repellent for Masonry Surfaces. Stormdry Masonry Protection Cream is a BBA-approved, deeply penetrating water-repellent cream designed to protect brick, stone, concrete, and mortar surfaces from rain penetration and dampness. Its unique cream formulation allows for single-coat application, providing long-lasting protection while maintaining the natural appearance of the substrate.. Key Features & Benefits. Deep Penetration: Penetrates up to 12 mm into masonry, ensuring effective water repellency beyond the depth of hairline cracks.. Breathable Protection: Allows moisture to escape from the masonry, preventing trapped dampness and associated issues.. Long-Lasting: Provides up to 25 years of protection with a single application, as certified by the British Board of Agrément (Certificate No. 15/5198).. Energy Efficiency: Helps reduce heat loss through walls by keeping masonry dry, enhancing thermal resistance.. Easy Application: Ready-to-use cream can be applied by brush, roller, or airless spray, with minimal dripping and mess.. Colourless Finish: Dries to a clear, natural finish, preserving the original appearance of the treated surface.. Versatile Use: Suitable for use on brick, stone, concrete, mortar, render, roughcast, and pebbledash surfaces.. Product Details. Appearance: Thick, white cream (dries clear).. Density: Approximately 0.86 g/cm³.. Coverage: Approximately 5 m² per litre, depending on substrate porosity.. Packaging: Available in 1L, 3L, 5L, and 20L containers.. Shelf Life: 18 months (12 months for 20L containers) when stored in a cool, well-ventilated area, protected from frost.. Application Instructions. Surface Preparation: Ensure surfaces are clean, dry, and free from contaminants. Remove any loose mortar, dust, or biological growth.. Crack Treatment: Hairline cracks up to 0.3 mm can be bridged by Stormdry. Wider cracks should be filled with suitable mortar incorporating Stormdry Repointing Additive.. Application: Apply a single coat using a brush, roller, or airless spray. For detailed areas, such as around windows, use a brush.. Drying Time: Stormdry starts to penetrate within 15–20 minutes. The whiteness fades as it absorbs, and the wall returns to its original appearance within 24–48 hours.. Rain Resistance: Treated masonry becomes resistant to light rain after 2–4 hours. Full water repellency develops over time, with a noticeable beading effect appearing within two months.. Limitations. Not suitable for use on sealed or painted surfaces.. Intended for above-ground use only.. Do not apply if rain is forecast within 24 hours or if temperatures are below 5°C.. Application to structures containing high levels of salt should be avoided.. Health & Safety. Refer to the Safety Data Sheet (SDS) for detailed information on handling, storage, and disposal.