AIM MX2E Lotus Elise / Exige Plug And Play Dash Logger Kit - Without Harness Adaptor

The AIM Motorsport MX2E Plug And Play Dash Logger Kit has been specifically designed for the Lotus Elise and Exige 2004-2020 models (fitted with a Toyota engine) *. The dash features a 6" high contrast, high quality TFT display with 18 integrated LEDs, and is mounted in the included bespoke instrument cluster. The cluster is very easy to install, includes a housing for the GPS module and has four integrated buttons (2 per side) built into the sides for scrolling through the pages/menus.* Please note - Some early 2004-2007 models might require an optional adaptor harness, and also may need a slight modification to the supplied binnacle to make it fit. The easy way to determine this is to look what colour dials are fitted and follow the below guide.2004-2007 - White instrument dials and fitted with an airbag (USA) Require an adaptor harness and do not need any modification of the supplied binnacle to make it fit.2004-2007 - White instrument dials and not fitted with an airbag (UK and Rest of World) Require an adaptor harness and slight modification of the supplied binnacle to make it fit.2008 Onwards Black instrument dials (UK, Rest of World inc USA) - Do not require an adaptor harness and do not need any modification of the supplied binnacle to make it fit.Specific for the Lotus Elise and Exige 2004-2020 models *Easy plug and play installation using the original connector4 Integrated buttons built into the clusterHigh contrast 6" colour TFT display (800x480 pixels)14 digital switch inputs18 integrated LEDs, (10 shift lights, 6 status information LEDs, 2 turn indicatorsExpansion port allows additional sensors or AIM SmartyCam HD camera to be addedRear camera inputWi-Fi connectivityThe MX 2E dash has two types of display - you can chose between road or track and there is even a choice between analog or digital. There are 16 display layouts to choose from, with four different colour options. Supplied with a GPS09 module which provides accurate GPS speed, lap timing and track mapping. You can view track data directly from the dash or more in depth analysis can be viewed using the powerful Race Studio 3 software (free to download) which enables you to display all the data in easy to understand graphs, histograms or tables so you can quickly make comparisons from different laps, sessions or track days.There is an analog camera input on the rear of the dash so you can swap your display into a mirror camera which can be activated by a push button command or event manager (i.e. select reverse gear).If required, the MX2E dash can be programmed with your current mileage. This can only be done before shipping the dash to you. To arrange this, please email aimenquiry@demon-tweeks.com and state what you want the mileage to be, and if this is in miles or kilometres.A modular system: Using the built-in CAN bus you can add optional expansion modules to visualise additional information:Channel Expansion - Add up to 4 0-5 Volt analogue channels.LCU-One S Lambda Controller - Wide band Lambda controller LCU-One S, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, everything you need to optimise fuelling.SmartyCam - A range of compact HD cameras designed specifically for Motorsport use.