Wilwood Combination Park Brake - Brake Caliper - Left Hand Black

Wilwood's Combination Parking Brake (CPB) Hydra-Mechanical Caliper uses hydraulic pressure for stopping and a mechanical locking mechanism for a parking brake. This redesigned unit provides new options for drum brake conversions and disc upgrades on rear axles that are not conducive to internal shoe systems.Match this caliper with the correctly proportionate rotor diameter, provides balanced bias and brake performance for use in conjunction with front wheel brake upgrades.Designed with a single piston and floating mount to attach to a fixed radial mount bracket. Using a floating mount the caliper can maintain perfect alignment when the cable actuated mechanical parking brake lock is engaged and then released. The floating mount will also keep the caliper and disc alignment correct which will prevent excessive pad knock-back on c-clip rear axles with measurable side play. This design also means that when pad wear takes affect the caliper will still be centered over the disc.Having a Radial Mount option means the caliper can be attached almost anywhere. Using axle flange brackets the caliper can be configured to mount at any height within the compatible rotor diameter range, or lateral position relative the hat and rotor offset. Fits rotor diameters: 11" to 13"Fits rotor width .81"The cable actuated park brake has common cable end connections that use 1/2" cable housing ends on the stop bracket, and a 1/8" to 9/64" cable with a crimped or welded ball end. The caliper will accept the OE cable on some vehicles. For other vehicles new cable ends can be ordered to adapt the caliper to the vehicle's original cable system. For custom installations, aftermarket hand brake kit suppliers can easily configure the cable with the correct attachment end.Calipers are handed and sold individually.Please note: Brake pads are not included but are available to purchase from our Motorsport brake pad category. Count Area (in sq.) Type Inlet Thread Size Rotor Width Rotor Diameter (in) Pad Area (in sq.) Pad Volume (cu in) Mounting center (in) Mounting Type Mount Side Material Weight (lbs) Color Finish 1 1.38 Steel M10 X 1.00 0.81" 13 4 1.5 5.98 Radial Left Hand Alum/Steel 6.1 Black Black Powder Coat 1 1.38 Steel M10 X 1.00 0.81" 13 4 1.5 5.98 Radial Right Hand Alum/Steel 6.1 Black Black Powder Coat 1 1.38 Steel M10 X 1.00 0.81" 13 4 1.5 5.98 Radial Left Hand Alum/Steel 6.1 Black/Red Black Powder Coat 1 1.38 Steel M10 X 1.00 0.81" 13 4 1.5 5.98 Radial Right Hand Alum/Steel 6.1 Black/Red Black Powder Coat