Arai RX-7V Evo Tatsuki Replica Motorcycle Helmet - S (55-56cm), Black/red/yellow

The Arai RX-7V Evo Tatsuki Replica Motorcycle Helmet is the latest helmet to feature Tatsuki Suzuki's design.RX-7V EVO VentilationPB-SNC2 outer shell constructionVariable Axis System (VAS) Visor TypeVentilationFree Flow System (FFS)Lowered side-air channelFront ventilation on centre top vent, diffuser system, brow vents extended to temple area and three position chin ventRear ventilation on neck exhaust and side exhaustsAerodynamicsPull down chin spoilerPatented adjustable air wingVisorVAS Max Vision visor with de-mist optionNew shield latch systemPinlock insert lensInteriorAntimicrobial Liner materialReplaceable cheek padsReplaceable interiorReplaceable chinstrap coversReplaceable Neck RollSpeaker PocketsFacial Contour System (FCS)5mm "Peel Away" ear cups/cheek pads5mm "Peel Away" Temple padThin Centre pad for more room in front areaComfortEmergency Release System (ERS)Breath guardChin curtainGeneralGlancing offFive times inspectedWashable interiorHandmadeAll-day comfortPenetration testedDouble D-ring deviceSmooth shape, better protectionStrong outer shell, soft inner shellOrganic shape5-year limited warrantyDifferent outer shellsArai in hour testApprovalECE 22-06The Arai RX-7V Evo Tatsuki Replica Motorcycle Helmet is the latest offering from the RX-7V range. This helmet comes with RX-7V ventilation which means the combined systems offer excellent and efficient ventilation. The top ducts provides 11% more airflow with bigger switches for easy operating. The Air Channel guides air from the eye port area to the side ducts. The diffuser is 20 mm longer with improved aerodynamics, and 19% larger intake scoops, both work together with the Air Wing to improve stability. The chin cover blocks air intrusion and draws more air from the mouth area. The free flow system that is included with this helmet helps to create airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. This helmet also comes with Eyeport air channel which offers enhanced air exhaust from the eye port area, pulled through dedicated air channel to side ducts, improving efficiency and reducing noise. The front ventilation of this helmet comes in the form of a Centre top vent, diffuser system and brow vents which are extended to the temple area. The Top Vent provides 11% more airflow than the previous Vent. The bigger switch makes opening and closing easier. The Top Vent has three positions; closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. The diffusers are 20mm longer and straightened for improved aerodynamics, working together with the Air Wing to improve stability. Compared to the previous diffusers, the efficiency of the intake scoops has increased by 19%. The air intake vents not only have more adjustability with three positions; closed, half open and fully open but also help to improve sealing that decreases wind noise and water intrusion. The brow vents mean fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. The rear ventilation comes as a neck exhaust vent and side exhausts. The neck air vent helps to enhance hot-air extraction from the interior and increases the ventilation effect at the lower part of the helmet. The side exhausts produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.This helmet is extremely aerodynamic with this being achieved using a pull down chin spoiler which helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable. Along with this, this helmet comes with an adjustable patented air wing which is MotoGP tested and designed to greatly reduce drag, turbulence and buffeting resulting in more comfort and additional top-speed. It improves stability of the helmet at high speeds or when braking hard and reduces noise. Depending on the model the Air Wing is adjustable in five different angles of attack positions to suit every riding position.The visor on this helmet is made using a VAS Max Vision visor with a de-mist option included. VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. The shield latch system that comes with this helmet is borrowed from Arai's F1 helmet, completely modified 3D moving shield latch mechanism secures the shield like never before, but operates smoothly with an intuitive fluid one finger operation even with gloves. This helmet comes with a pinlock insert lens which effectively prevents misting and fogging of the vi