B-G Racing Hub Stands Kit - Option 2

The B-G Racing Hub stands allow accurate chassis adjustment eliminating the variances that may be present when wheels and tyres are fitted. They allow easier adjustment of the ride height, corner weights, camber, castor and toe angles without rolling on and off the weights. Suitable for vehicles up to 2000kg.Provides easier and more accurate alignment2000kg vehicle capacityEliminates discrepancies which can occur when wheels and tyres are fittedNo need to roll on and off the scales to unload the suspension after adjustments are madeHeight adjustable and with a choice of bolt patterns to suit a wide range of vehiclesManufactured from Billet aluminium the kits are fantastic quality and durable enough to cope with busy workshops, yet still retain the slimmest profile possible to enable easier transportation. Each base features high load, low resistance roller bearings which allow the stands to respond to any changed made to the geometry. Using hub stands to replace the wheels and tyres keeps the suspension bind free and your adjustment results can be seen instantly.Each set of hub stands is supplied with a set of 4 toe sticks which can be bolted to the hub face for stringing or to the hub base for measuring total toe. A set of 8 105mm toe extension plates are also supplied to offset the toe sticks away from the hub to clear calipers if required. Stainless steel safety plates are also includes and are used to prevent the vehicle from rolling off the scale padsThe Hub Stand Kits are a universal type fitment (standing on most scale pad kits available from Demon Tweeks) and are available in a choice of hub PCD types (shown below)Hub adaptor patterns available. Option 1: 4 x 100/108/114.3mm (Centre Bore - 70mm)Option 2: 5 x 108/114.3/120mm (Centre Bore - 76.2mm)Option 3: 5 x 114.3/120/130mm (Centre Bore - 88.9mm)Option 4: 5 x 110/114.3/130mm (Centre Bore 72.6mm) Option 5: 5 x 100/112/114.3mm (Centre Bore - 73.6mm) Option 6: 5 x 114.3/108/100mm (Centre Bore - 71.1mm)Option 7: Blank plates (no PCD or Centre Bore holes)Option 8: Radical 4 x 108 (20mm hole) (Centre Bore 70mm)Option 9: Ginetta 5 x 108/110 (Centre Bore 72.6mm)Option 10: 5 x 130/120/113.3 (Centre Bore 88.9mm) Porsche 911 CupOption 11: 5 x 120/115/108 (Centre Bore 76.2mm)Option 12: 5 x 112 (Centre Bore 73.6mm) VW / Audi TCROption 13: 5 x 128 (Centre Bore 77.0mm) Aston Martin Vantage GT4Option 14: 5 x 130/120/112mm (Centre Bore 88.9mm) Additional hub plates are available separately, click here to view B-G Racing additional hub plates. Centre nut adaptor collars are also available for vehicles with centre lock wheels, click here to view B-G Racing centre nut adaptor collars