Florence 8 Drawer Black Chest of Drawers

Upgrade your bedroom with the stylish and functional Florence 8 Drawer Black Chest of Drawers. Each drawer is equipped with easy glide runners, ensuring smooth and effortless operation. With its sleek and contemporary design, it seamlessly blends into any decor or interior style. Assembly is a breeze, and you can set up your chest of drawers with minimal hassle and clutter. Assembly instructions: Step 1: Move the furniture to the wall where it will be placed. Step 2: Using a pencil, mark the wall through the holes on the top panel. Step 3: Move the furniture slightly away from the wall. Step 4: From each pencil mark, measure 30mm downwards and make a new mark. Step 5: Drill a hole in the wall at each new marking. For advice on suitable wall fittings, please consult your local hardware store. Step 6: Gently tap the correct wall plug or anchor into the drilled holes using a hammer. Step 7: Remove or clean off all previous pencil markings from the wall. Step 8: Following the illustration, attach the supplied tip-over restraint to the wall with a screw. If unsure, seek assistance from your local hardware store. Step 9: Move the furniture close to the wall, leaving a small gap for adjustment. Step 10: Insert the wall-mounted tip-over restraint through the holes in the top panel at the back of the furniture. Step 11: Push the furniture gently back so it sits flush against the wall. Step 12: From inside the furniture, secure the tip-over restraint to the underside of the top panel using the screws provided.