LANCOM XS-4554YUP

10G stackable full layer 3 multi-Gigabit PoE++ access switchFor demanding infrastructures in enterprise environments. the LANCOM XS-4554YUP access switch offers enormous performance even under high utilization: With 36x 2.5G and 12x 10G multi-Gigabit Ethernet ports. all with Power over Ethernet IEEE 802.3bt (PoE++). as well as 4x 25G SFP28 and 2x 100G QSFP28 fiber-optic ports. the switch is the ideal basis for linking network components with high energy and performance requirements. such as Wi-Fi 7 access points. Redundancy functions. such as Virtual Port Channel (VPC) or stacking. enable network operation with up to 100% uptime with support for in-service software updates (ISSU). This allows VPC and stacking speeds of up to 400G to be achieved. Redundant and hot-swappable power supplies and fan modules as well as an included LANCOM Limited Lifetime Warranty (LLW) offer additional operational reliability. Depending on your preference. you can choose between the management options web-based GUI. industry-standard CLI. or the LANCOM Management Cloud (LMC) for centralized network management. which you can switch between at any time.HighlightsHigh performance on 54 portsThe LANCOM XS-4554YUP is equipped with 36x 2.5G multi-Gigabit PoE++ Ethernet ports. 12x 10G multi-Gigabit PoE++ Ethernet ports as well as 4x SFP28 and 2x QSFP28 ports. which support transfer rates of 25 and 100 Gbps respectively. With the SFP28 and QSFP28 ports. you can continue to use your existing fiber optics infrastructure while benefiting from higher bandwidths per port at the same time. This means that fewer hardware purchases are required in the long term. which reduces your investment costs (CapEx). With a data throughput of 1.020 Gbps on the backplane. the switch offers wirespeed performance even at high workloads. The multi-Gigabit access switch thus forms the powerful basis for modern network infrastructures in all industries and areas of application.Network design with 100% uptime via VPCVirtual Port Channel (VPC). or Multi-chassis Link Aggregation Group (MC-LAG). is the preferred solution for increasing the reliability of large network infrastructures. If you link two LANCOM XS-4554YUP in a VPC network and connect the underlying network components redundantly. the other switch remains active in the event of a failure or during in-service software update (ISSU) of one of the VPC-connected switches. thus ensuring 100% uptime. This is possible because both switches remain physically independent devices that merely form a virtual network. In addition. the link speed of the underlying network components is multiplied. as a VPC network allows multiple connections to the underlying level (active/active). For constant data forwarding. the switches exchange important information about the network. such as MAC tables. via their peer link.A high-performance basis for Wi-Fi 7 – PoE includedThanks to twelve high-performance 10G multi-Gigabit Ethernet ports. the PoE switch LANCOM XS-4554YUP is the ideal LAN-side basis for integrating Wi-Fi 7 into modern infrastructures. This is because Wi-Fi 7 access points or other network components with high transmission speeds and energy requirements mean increased performance requirements at the access level. To ensure the full performance and range of 10G. cables with higher specifications such as CAT6a or CAT7 are required. For a centralized and efficient power supply without additional electrical installation or power supply units. the LANCOM XS-4554YUP supplies connected PoE end devices and supports the Power over Ethernet standards IEEE 802.3af (PoE). IEEE 802.3at (PoE+). and IEEE 802.3bt PD-Type 4 (PoE++) with up to 90 watts per port. Thanks to high power reserves. a PoE budget of 1.440 watts is available when using both power supply units in power mode.AdvantagesRedundant network topologies with high-performance stackingStacking allows up to eight physical switches from the XS-4500 series to be combined into one logical unit for convenient maintenance and management – at a single site or even distributed across different sites. The stacking function can be activated on both the front SFP28 and the rear QSFP28 uplink ports. The stack manager uses the non-stop forwarding function to cyclically supply its standby with current information such as the MAC table and its own status information. In the event of a failure. the standby manager can ensure that the network is almost 100% up and running within a few seconds. In the event of a firmware update. the stack is restarted. for which a maintenance window must be scheduled. The entire stack can be conveniently managed and monitored via cloud-managed switch stacking using the LANCOM Management Cloud. The network can also be expanded at a later date. as the new switch receives its configuration automatically from the stack manager and is ready for use within seconds.Full control over your investmentFully equipped ex works. ready for immediate use. everything