zinc plated, zinc plated, HxD 3000 x 800 mm, max. load 9000 kg

Upright frame for Space pallet racking, zinc plated, HxD 3000 x 800 mm, max. load 9000 kg. Supplied = flat pack. Height = 3000 mm. Colour = zinc plated. Depth = 800 mm. Material = steel. Max. load = 9000 kg. Width = 90 mm. Product type = pallet racking upright frames. Customs tariff number = 73089059. Country of origin = SWE. Gross weight = 27.03 kg. Weight = 27.03 kg. Complies with the new standard for pallet racking units EN 15512:2020. Upright frame for pallet racking. Easy to assemble. Complete with floor anchor. Robust support frames for pallet racking, made from steel. The complete pallet racking is built from only two components, the frames and the support beams. All load-bearing components are marked with the load capacity. For maximum safety, there is a range of accessories such as impact protection, push-through protection, mesh decking, spacers for back-to-back racking and more. The Space pallet racking is based on a proven design where safety and function are paramount. The pallet racking consists of only two components: the support frames and the beams. The pallet racking meets all safety requirements and standards according to standard EN 15512:2022 and the tolerance requirements for fully automated storage. For pallet racking and other storage racking, the following applies: Storage racking intended for changing loads must be permanently and clearly marked with the maximum load per bay and the maximum load per beam level. If an impact can pose a hazard, impact protection must be provided. Pallet racking must be anchored if there is a risk of instability. Pallet racking must be fitted with a protective device that prevents pallets from being pushed through the racking (so-called push-through protection), unless this is clearly not required.