Internal PVC Strip Curtains with Rail - Heavy-Duty Vehicle use - 400mm wide 4mm thick (per metre squared) 55% - 95% overlap

Internal walk and drive through PVC curtains for use as internal barriers in warehouse factory doorways openings (sometimes called plastic curtains). Warehouses and factories often have many different areas within the building and having easy access from one to the next is an absolute necessity. Standard doors may not be suitable so PVC curtains provide a more flexible option that allows for much easier access. Depending on which product is selected the PVC strip curtains allow either people or vehicles such as forklifts to pass through with ease. This range of products is designed to be used as internal barriers within warehouses and factory doorways. They are sometimes also known as plastic curtains. If you're looking for welding blankets for use in welding areas we stock those too! Not recommended for use on external doors as they may blow about too much in windy conditions due to the reduced overlap of each PVC / plastic strip if this is your intended use please choose External Doorway Curtains Reduce noise levels between different work rooms Reduces the possibility of birds insects and other pests entering the room Keeps areas at the correct temperature at all times Affordable and low maintenance option - easy to install fit the pre drilled rails to the doorway and hook on the strips In situations where curtains are in constant use by large forklifts or other large vehicles we recommend that heavy duty rails are fitted please call us for details Priced per square metre If the height you require isn't within a 2.5 to 5m range please get in touch and we can assist you If more than one curtain is required it should be entered into the basket individually - even for the same door aperture HOW TO ORDER Measure your door aperture / opening in metres (0.5 metre minimum width) and enter into boxes below. Our cost calculator will automatically round up your measurements to the nearest full square metre to obtain the amount needed giving a strip overlap as detailed in the table below If you are in any doubt about what you need how to work it out or anything else please call us we will be happy to advise you as these products are cut to order to suit your opening size Returns / Credits cannot be offered on these products.