Bio-Circle 20 x 500 ml bottles and 10 sprayers, 20 x 500 ml bottles and 10 sprayers, capacity 10 l

Additive Cleaner 100 adhesive and separating agent cleaner, 20 x 500 ml bottles and 10 sprayers, capacity 10 l. Area of application = surface cleaning. Model = solution. Contents = 10 l. Weight = 9.75 kg. pH value = 10.8. Weight per item = 0.49 kg. Material = solution. Product type = surface cleaning agents. Customs tariff number = 34025090. Country of origin = DEU. Gross weight = 10.15 kg. Weight = 9.75 kg. Sustainability = Product made by CO₂ compensated supplier. Reduced VOCs: fewer volatile organic compounds. Ready to use: cleaner is ready to use immediately. Non-hazardous in accordance with CLP regulation. Alternative to solvents for residue free 3D printer maintenance! Additive Cleaner 100 is the ideal solution for residue free cleaning of 3D printers. It effectively removes fingerprints, dust, oil, grease and any uncured UV resin and leaves no residue behind. Manual application is straightforward and does not damage the material, suitable for all standard surfaces in 3D printing. The cleaner is environmentally friendly and safe, non-hazardous and VOC reduced. It improves the print quality in the FFF process and increases the service life of 3D printers. All the advantages of the Additive Cleaner 100: - Effective cleaning: removes fingerprints, dust, oil, grease and any uncured UV resin. - Environmentally friendly and safe: non-hazardous and reduced level of VOCs. - Does not damage materials: suitable for all standard 3D printer surfaces. - Improved print quality: can increase the adhesion of components to the print bed. - Increased service life of 3D printers: effortless maintenance extends the service life of the devices. Area of use: The manual cleaner is used in 3D printing to remove light dirt from surfaces. It can also increase the adhesion of components to the print bed in the FDM process. Usage: The cleaner is ready to use and is wiped off with a clean cloth after being sprayed on. Please note that it must not be sprayed onto hot surfaces. Allow the parts or surfaces to cool down before use to achieve optimum results.