ATEN 2 x 60W Power Amplifier with DSP

A dual-channel DSP-equipped amplifier that delivers 60 W per channel in a compact enclosure. Supports balanced / unbalanced line level inputs and drives 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems. Built-in WebGUI-configurable DSP allows speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and system protection. Ground lift deployed to eliminate unwanted noises from power circuit. Class-D design with ENERGY STAR qualification for high power efficiency. Customizable Auto Standby mode – Amplifier automatically switches to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes. Integrated protection circuit – Protects the system from damages caused by Amp shortcut, Amp output over/under voltage, high frequency overload, and overtemperature. Amplifier will be muted when the heat sink temperature exceeds the limit. Fanless design – Avoids fan noise and prevents dust from building up. Expansion slot for add-on expansion card – Install AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals. Supports VK Control System via RS-232 and Ethernet connection. Supports rack or surface-mounting. Firmware upgradable. ATEN AP206 is a dual-channel DSP-equipped amplifier that delivers 60 W per channel in a compact enclosure. The support for balanced / unbalanced line level inputs and the capability of driving 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems have made AP206 suit a wide range of public address applications. Configurable through an intuitive WebGUI, the built-in DSP allows Speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and extensive audio system protection purposes. Ground lift is deployed to eliminate unwanted hum noises from power circuit. Immersive sound experience is delivered with no compromise on power efficiency thanks to the amplifier’s Class-D design and ENERGY STAR qualification, conserving energy while lowering operational costs. Customizable Auto Standby mode enables the AP206 to automatically switch to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes.. Speaking of the system protection circuit, the AP206, along with the speakers connected to it, are prevented from damages led by shorted outputs, over / under-voltage, high frequency overload, and overtemperature. Plus, the amplifier will be muted when the heat sink temperature exceeds the limit. The fanless design avoids fan noise and prevents dust from building up inside the chassis.. Engineered to deliver the ultimate flexibility, the AP206 features an expansion slot for plugging in AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals. The amplifier can also be integrated with VK Control System via RS-232 and Ethernet connection for comprehensive control even from a distance. Mounting hardware is available for rack or surface-mounting depending on the installation needs. With a rich set of features, the AP206 assures reliable amplification with professional audio quality and high power efficiency for any enterprise-grade applications that require high quality sound reinforcement and distribution.. Audio. RMS rated power. 120 W. Frequency range. 50 - 20000 Hz. Output impedance. 600 Ω. Input impedance. 20000 Ω. Total Harmonic Distortion (THD). 0.1%. Amplifier class. D. Peak power per channel. 120 W. Ports & interfaces. Number of Euroblock input connectors. 2. RS-232 ports. 1. Number of Euroblock output connectors. 2. RS-232 connector type. 3-pin. Speakers connectivity type. Euroblock. Technical details. Country of origin. Taiwan. Material. Metal. Product colour. Black. Connectivity technology. Wired. Power. Power protection features. Overload, Under voltage. Maximum current. 2 A. AC input frequency. 50/60 Hz. AC input voltage. 100 - 240 V. Power source type. AC. Weight & dimensions. Weight. 2.15 kg. Height. 44 mm. Depth. 200 mm. Width. 323 mm. Operational conditions. Operating relative humidity (H-H). 0 - 80%. Storage temperature (T-T). -20 - 60 °C. Operating temperature (T-T). 0 - 50 °C. Certificates. Certification. FCC, CE, UKCA. Packaging data. Package weight. 3.5 kg. Package height. 140 mm. Package depth. 462 mm. Package width. 322 mm. Logistics data. Master (outer) case gross weight. 3.5 kg. Master (outer) case height. 140 mm. Master (outer) case length. 462 mm. Master (outer) case width. 322 mm. Harmonized System (HS) code. 85184000. Quick Start Guide. leaflet. manual pdf