AIM Carbon Fibre Wireless Wheel 10 Button Plate

The AIM Motorsport 10 button plate is made from lightweight carbon fibre and is a fully wireless system that will give you all the controls you need. Featuring 8 digitals push buttons and two 12 position analogue inputs which can be set as traction control settings or for engine mapping giving you a wide wide of adjustability at your finger tips. The button plate uses a wireless (RF) connection from the button plate transmitter to the supplied CAN receiver. The receiver is compact enough to be neatly installed behind your dashboard and attaches to your AIM CAN device using the supplied binder harness.8 digital push buttons and two 12 position analogue inputsLightweight resilient carbon fibre constructionSupplied with a standard CR2 lithium batteryWireless system with no cables making it perfect for detachable steering wheelsTested to withstand the harshest EMI that can be generated within your car10 fully configurable automated steering controlsThe button plate is suitable for most standard bolts patterns on 6x70mm, 6x74mm and 3x50.8m steering wheels. Supplied with a standard CR2 lithium battery that has a guaranteed lifetime of 3 years or 50,000 miles. You don't have to worry about the battery going flat, with the smart system the battery voltage is regularly transmitted to the CAN receiver and then forwarded to your AIM device that gives you around 30 days notice if the battery needs to be replaced.A sticker sheet is available separately with individual pre printed labels shaped to complement the buttons and switches.Use of an AIM PDM and RaceStudio 3 software, allows full control and behaviour of the momentary push buttons to act as simple latching switches or more complex control.Please note: Images showing the steering wheel are for illustration purposes only. The steering wheel is not included.