Brodit Holder f. Cable Attachment

For Motorola cable. Holder with cable plug attachment. To be used with Motorolas original cable The cable is easy to attach to the holder. and then the cable connects to the radio automatically when you put your unit in the holder so you do not have to connect it manually each time. (Cable not included). Please read all instructions and look at the pictures before attaching the holder. 1. Installation of cable: Place the holder with the backside upwards. Peel off the adhesive tape cover on the holder. Place the connector into the lower part of the holder. Place the back piece over the connector. make sure the cable is in the correct position. Screw the back piece into place using the removed screws. The cable is in place. 2. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. 3. Place the holder over the attaching part. Screw the holder onto the attaching part. 4. The holder in place. with cable in place.