4-Way Fast Charging Module USB Mobile Phone Charging Board

1. Soft start function2. Conversion efficiency reaches 97%3. 220Khz switching frequency4. Built-in synchronous switch step-down converter chip5. Output voltage range: 3V to 12V, automatically adjusted according to the fast charge protocol6. Used in car chargers, fast charging adapters, smart power strips, solar chargers, etc.7. This module is a 4-way pressure drop fast charging module, please use 12V-30V DC power supply, and the positive and negative poles cannot be reversed.8. Input voltage range: 4.5V to 32V (the input voltage must be higher than the output voltage, because it is a voltage drop module)9. Multiple protections, high reliability, output over current, input over voltage, input under voltage, output short circuit protection, over temperature protection of the whole machine10. The output has CV/CC characteristics (output current is less than the set value, output CV mode; output current is greater than the set value, output CC mode)11. PCB adopts FR-4 1.6mm thickness design, optimized layout and wiring, tight design, open window on the back for heat dissipation, low full load working temperature, standby current 0.013A, module has output voltage compensation function12. Each of the four channels supports QC 3.0 fast charging protocol, and can support fast charging at the same time, and can output 5V/9V/12V (requires mobile phone protocol support) voltage, output current is adaptive, single channel power consumption 24W, 4 channels module Power consumption 96WSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 32cm * 42cm / 20.47inch * 12.6inch * 16.54inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs40HQ: 885 cartons * 200 pcs = 177000 pcs